- This topic has 1 reply, 2 voices, and was last updated 2 years, 8 months ago by .
- You must be logged in to reply to this topic.
Home › Forums › The projects hosted on the site › MKS WiFi firmware and BeePrint web interface › [BeePrint enhancement] Auth to access Beeprint
Tagged: Auth, BeePrint, Encryption, Login
Hi everybody 🙂
First, thanks to Renzo for this beautiful (and useful) project; I’ll not be surprised if in the future beePrint will become the most used interface, as long as MKS wifi support is extended to all other printers;
I’m using it every day, and in the next days I will try also to integrate ESP-CAM, in order to have full control of printing process when I’m not at home;
But i’m a little afraid to routing the panel outside of my home network, because the printer itself will be to much exposed.
So my feature request is some kind of authentication (login & password, at least only password) that keep all the system protected; technically also the traffic on websocket should be encrypted between client and printer, it’s too easy to send a pre-heating command and move nozzle.
Thanks again for sharing,
Mauro
Hi Mauro,
I have in mind an auth solution, but probably without https (too resource and memory), so I must think better how to do.
Thanks for sharing Renzo
More
3D Printer 3D printer upgrade ABB Arduino Arduino IDE Arduino SAMD boards Aurora AWS CNC Cyclone PCB Factory Cyclone PCB Factory how to build It Display DynamoDB E32 EMail esp01 esp32 esp8266 File System Firmware i2c Library LoRa MicroPython Milling PCB My PCB Networking PCB pinout Power saving Programming board Raspberry Pi REST API RF rp2040 SD Card Sensors Sleep and Wake UP SPI STM32 Temperature Tutorial Web Server Wemos D1 mini WiFi