bCNC Tutorial: restore work and milling process – 3
After carrying out all the calibrations, all that remains is milling our piece. If the whole process is successful, I expect an excellent final product.
Category: CNC
bCNC Tutorial: autolevel – 2
One of the most important features is the auto-level. Even if your CNC is precise, it will never be accurate to one-hundredth of a millimeter, but to carry out the removal of copper, you will have to have an excellent level of precision.
Here we are going to learn how to do auto-level.
bCNC tutorial: installation, probe, PCB instruments – 1
I have been prototyping PCBs with the CNC for years. I have created a CNC machine suitable for this, and today I would not know how to do it without it.
I have been using bCNC for some time as a GCode sender, a very simple open-source software, we will see how to install it and do the probe.
FlatCAM practical tutorial: gcode and PCB milling – Part 6
FlatCAM is a program for preparing CNC jobs for making PCBs on a CNC router. Among other things, it can take a Gerber file generated by your favorite PCB CAD program, and create G-Code for Isolation routing.
Here we are going to create gcode and show the milling process.
FlatCAM practical tutorial: contour – Part 5
FlatCAM is a program for preparing CNC jobs for making PCBs on a CNC router. Among other things, it can take a Gerber file generated by your favorite PCB CAD program and create G-Code for Isolation routing.
Here we are going mill contour.
FlatCAM practical tutorial: silkscreen geometry – Part 4
FlatCAM is a program for preparing CNC jobs for making PCBs on a CNC router. Among other things, it can take a Gerber file generated by your favorite PCB CAD program and create G-Code for Isolation routing.
Here we are going to add a silkscreen.
FlatCAM practical tutorial: clean non copper area – Part 3
FlatCAM is a program for preparing CNC jobs for making PCBs on a CNC router. Among other things, it can take a Gerber file generated by your favorite PCB CAD program and create G-Code for Isolation routing.
Here we are going to remove copper islands.
FlatCAM practical tutorial: copper traces geometry – Part 2
FlatCAM is a program for preparing CNC jobs for making PCBs on a CNC router. Among other things, it can take a Gerber file generated by your favorite PCB CAD program, and create G-Code for Isolation routing.
Here tha isolation of traces.
FlatCAM practical tutorial: introduction, installation, and import – Part 1
FlatCAM is a program for preparing CNC jobs for making PCBs on a CNC router. Among other things, it can take a Gerber file generated by your favorite PCB CAD program, and create G-Code for Isolation routing.
Here an introduction, how to install and import files.
CNC Cyclone PCB Factory: settings and tests – Part 7
I’d like to renew my cnc for PCB so I decide to create new one from an existing project named Cyclone PCB Factory.
Firmware configuration and milling process.
