- This topic has 0 replies, 1 voice, and was last updated 40 seconds ago by
.
-
Posts
-
-
I’m trying to get an E32 900T30D to TX at 915MHz but regardless of the settings it continues to TX on 866MHz. Checking the frequency band code of the module returns 32 and that band code 32 (0x20) = 868 MHz. My understanding is that that 64 | 0x40 is the 915 MHz family.
Do I need to change the firmware or do something else?
Here are the configuration settings – unfortunately they have no effect…
#define FREQUENCY_915
#include “LoRa_E32.h”
…
ResponseStructContainer c;
c = e32ttl1w.getConfiguration();
Configuration configuration = *(Configuration*)c.data;configuration.ADDH = 0x0;
configuration.ADDL = 0x1;
configuration.CHAN = 53;configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
configuration.SPED.uartBaudRate = UART_BPS_9600;
configuration.SPED.uartParity = MODE_00_8N1;
configuration.OPTION.fec = FEC_1_ON;
configuration.OPTION.fixedTransmission = FT_FIXED_TRANSMISSION;
configuration.OPTION.ioDriveMode = IO_D_MODE_PUSH_PULLS_PULL_UPS;
configuration.OPTION.transmissionPower = POWER_21;
configuration.OPTION.wirelessWakeupTime = WAKE_UP_1250;
c.close();
-
- You must be logged in to reply to this topic.
