Sending data via LORA to the IOT gateway

Home › Forums › The libraries hosted on the site › EByte LoRa e220 UART devices LLCC68 › Sending data via LORA to the IOT gateway

Viewing 5 reply threads
  • Author
    Posts
    • 16 August 2023 at 12:44 #27136
      Default
      Participant

        Hi,
        I have an IOT gateway and an arduino board with an E220 module. How can I send data from arduino to my gateway? Currently, I have an air condition sensor dedicated to the gateway and the gateway receives packets such as on the screen below:

        For Example:
        A payload with the device address and devEUI is sent in a JnReq packet, and the values ​​from the sensors are sent in the UpUnc packet

        Is it possible to make an ABP join with the E220 module?

      • 17 August 2023 at 18:10 #27146
        Renzo Mischianti
        Keymaster

          Hi,
          Witch kind of Gateway do you have?
          Bye Renzo

        • 17 August 2023 at 22:01 #27148
          Default
          Participant

            Milesight UG56

          • 18 August 2023 at 08:28 #27150
            Renzo Mischianti
            Keymaster

              Hi,
              the compatible Gatewais are distributed by EByte, your gateway can’t work with E220.
              Bye Renzo

            • 18 August 2023 at 09:01 #27151
              Default
              Participant

                Thanks for the answer. Can you suggest which module will handle OTAA or ABP?

              • 19 August 2023 at 10:56 #27171
                Renzo Mischianti
                Keymaster

                  Hi,
                  I think only e78 support that, for the e220 i think there are any normal lora gateway.
                  Bye Renzo

              • Author
                Posts
              Viewing 5 reply threads
              • You must be logged in to reply to this topic.
              Exit mobile version