Arduino UNO/Mega e Ethernet: inviare Email con allegati (Libreria EMailSender v4.0.0)

lib_deps =
    xreef/EMailSender@^4.0.0

/*
 * EMailSender Library - Arduino Mega + Brevo (Sendinblue) Example
 *
 * This example shows how to send email using Arduino Mega with Ethernet shield
 * and Brevo SMTP service (port 587 without SSL/TLS).
 *
 * WHY BREVO?
 * - Arduino Mega has only 8KB RAM (not enough for SSL/TLS which needs 24KB+)
 * - Brevo accepts port 587 WITHOUT SSL/TLS encryption
 * - 300 emails/day free tier
 * - No domain verification required (just verify your email address)
 *
 * SETUP INSTRUCTIONS:
 * 1. Register at https://www.brevo.com (free account)
 * 2. Go to SMTP & API → SMTP settings
 * 3. Get your SMTP credentials:
 *    - Login: something like "98a01e002@smtp-brevo.com"
 *    - Password: your API key (e.g., "xsmtpsib-abc123...")
 * 4. Verify a sender email address in Brevo dashboard
 * 5. Update the credentials below
 *
 * HARDWARE:
 * - Arduino Mega 2560
 * - W5500 or W5100 Ethernet Shield
 * - Ethernet cable connected to router
 *
 * WIRING (W5500):
 * - MOSI → Pin 51
 * - MISO → Pin 50
 * - SCK  → Pin 52
 * - CS   → Pin 10
 * - VCC  → 5V
 * - GND  → GND
 *
 * Author: Renzo Mischianti
 * Website: https://www.mischianti.org
 * Library: https://github.com/xreef/EMailSender
 * License: MIT
 * Date: 2025-01-07
 */

#include <SPI.h>
#include <Ethernet.h>
#include <EMailSender.h>

// ========== CONFIGURATION - UPDATE THESE VALUES ==========

// Brevo SMTP Credentials (get from https://app.brevo.com/settings/keys/smtp)
const char* BREVO_LOGIN = "<YOUR-BREVO-SMTP-LOGIN>";        // Your Brevo SMTP login
const char* BREVO_PASSWORD = "<YOUR-BREVO-PASSWD>";   // Your Brevo SMTP password/API key

// Email addresses
const char* EMAIL_FROM = "<YOUR-EMAIL-VERIFIED-IN-BREVO>";   // Must be verified in Brevo
const char* EMAIL_TO = "<RECEIVER-EMAIL>";               // Recipient email

// Ethernet MAC address (make it unique on your network)
byte mac[] = {0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED};

// Optional: Static IP configuration (comment out to use DHCP)
// IPAddress ip(192, 168, 1, 177);
// IPAddress gateway(192, 168, 1, 1);
// IPAddress subnet(255, 255, 255, 0);
// IPAddress dns(8, 8, 8, 8);

// ========== END CONFIGURATION ==========

// Create EMailSender instance for Brevo
EMailSender emailSend(
  BREVO_LOGIN,              // Brevo SMTP login
  BREVO_PASSWORD,           // Brevo SMTP password
  EMAIL_FROM,               // From email (must be verified in Brevo)
  "ArduinoMega",            // Sender name
  "smtp-relay.brevo.com",   // Brevo SMTP server
  587                        // Port 587 (AUTH LOGIN without SSL)
);

void setup() {
  Serial.begin(115200);
  while (!Serial) {
    ; // Wait for serial port to connect (needed for native USB)
  }

  Serial.println("\n========================================");
  Serial.println("Arduino Mega + Brevo Email Example");
  Serial.println("========================================\n");

  // Initialize Ethernet
  Serial.println("Initializing Ethernet...");

  // Try DHCP first
  if (Ethernet.begin(mac) == 0) {
    Serial.println("DHCP failed!");

    // Fallback to static IP (uncomment the IP variables above)
    // Serial.println("Trying static IP...");
    // Ethernet.begin(mac, ip, dns, gateway, subnet);

    Serial.println("ERROR: Cannot initialize Ethernet!");
    Serial.println("Check:");
    Serial.println("  - Ethernet cable is connected");
    Serial.println("  - Shield is properly seated");
    Serial.println("  - Router DHCP is enabled");
    while (1) {
      delay(1000);
    }
  }

  // Give Ethernet time to initialize
  delay(1500);

  // Print network information
  Serial.println("✓ Ethernet connected!");
  Serial.print("  IP Address: ");
  Serial.println(Ethernet.localIP());
  Serial.print("  Gateway: ");
  Serial.println(Ethernet.gatewayIP());
  Serial.print("  Subnet Mask: ");
  Serial.println(Ethernet.subnetMask());
  Serial.print("  DNS Server: ");
  Serial.println(Ethernet.dnsServerIP());
  Serial.println();

  // Check link status
  if (Ethernet.linkStatus() == LinkOFF) {
    Serial.println("WARNING: Ethernet cable not connected!");
  }

  // Send test email
  Serial.println("Preparing to send email...");
  sendTestEmail();
}

void loop() {
  // Keep Ethernet connection alive
  Ethernet.maintain();

  // Nothing else to do in loop
  delay(10000);
}

void sendTestEmail() {
  Serial.println("\n--- Sending Email ---");

  // Prepare email message
  EMailSender::EMailMessage message;
  message.subject = "Test from Arduino Mega + Brevo";

  // IMPORTANT: Add space at beginning to avoid first character bug
  message.message = " Hello from Arduino Mega!\n\n";
  message.message += "This email was sent using:\n";
  message.message += "- Arduino Mega 2560\n";
  message.message += "- Ethernet Shield (W5500/W5100)\n";
  message.message += "- Brevo SMTP service (port 587 without SSL)\n";
  message.message += "- EMailSender Library v4.0.0\n\n";
  message.message += "Brevo is perfect for Arduino because:\n";
  message.message += "✓ No SSL/TLS required (Arduino Mega has only 8KB RAM)\n";
  message.message += "✓ 300 emails/day free tier\n";
  message.message += "✓ No domain verification needed\n";
  message.message += "✓ Simple AUTH LOGIN authentication\n\n";
  message.message += "Timestamp: " + String(millis() / 1000) + " seconds\n\n";
  message.message += "---\n";
  message.message += "Sent using EMailSender Library by Renzo Mischianti\n";
  message.message += "More info: https://www.mischianti.org\n";
  message.message += "GitHub: https://github.com/xreef/EMailSender\n";

  message.mime = MIME_TEXT_PLAIN;

  // Print email details
  Serial.println("From: " + String(EMAIL_FROM));
  Serial.println("To: " + String(EMAIL_TO));
  Serial.println("Subject: " + message.subject);
  Serial.println();

  // Send email
  Serial.println("Connecting to Brevo SMTP server...");
  Serial.println("Server: smtp-relay.brevo.com:587");

  EMailSender::Response resp = emailSend.send(EMAIL_TO, message);

  // Print result
  Serial.println("\n--- Result ---");
  Serial.print("Status Code: ");
  Serial.println(resp.code);
  Serial.print("Description: ");
  Serial.println(resp.desc);
  Serial.print("Success: ");
  Serial.println(resp.status ? "YES ✓" : "NO ✗");

  if (resp.status) {
    Serial.println("\n✓✓✓ EMAIL SENT SUCCESSFULLY! ✓✓✓");
    Serial.println("Check your inbox at: " + String(EMAIL_TO));
  } else {
    Serial.println("\n✗✗✗ EMAIL SENDING FAILED! ✗✗✗");
    Serial.println("\nTroubleshooting:");
    Serial.println("1. Check Brevo credentials are correct");
    Serial.println("2. Verify sender email in Brevo dashboard");
    Serial.println("3. Check internet connection");
    Serial.println("4. Make sure port 587 is not blocked by firewall");
    Serial.println("5. Verify Brevo account is active");
  }

  Serial.println("\n========================================\n");
}

========================================
Arduino Mega + Brevo Email Example
========================================

Initializing Ethernet...
✓ Ethernet connected!
  IP Address: 192.168.1.54
  Gateway: 192.168.1.1
  Subnet Mask: 255.255.255.0
  DNS Server: 192.168.1.10

Preparing to send email...

--- Sending Email ---
From: xxx@xxx.xx
To: xxx@xxx.xx
Subject: Test from Arduino Mega + Brevo
Connecting to Brevo SMTP server...
Server: smtp-relay.brevo.com:587

--- Result ---
Status Code: 0
Description: Message sent!
Success: YES ✓

✓✓✓ EMAIL SENT SUCCESSFULLY! ✓✓✓
Check your inbox at: xxx@xxx.xx

========================================

/*
 * EMailSender Library - Arduino Mega + Brevo + SD Card Attachment Example
 *
 * This sketch demonstrates how to send an email with a file attachment
 * from an SD card using an Arduino Mega, Ethernet Shield, and Brevo.
 *
 * HARDWARE:
 * - Arduino Mega 2560
 * - W5500 or W5100 Ethernet Shield
 * - MicroSD Card Reader Module
 * - MicroSD Card (formatted as FAT16 or FAT32)
 *
 * WIRING (Common SD Card Module):
 * - VCC  → 5V
 * - GND  → GND
 * - MISO → Pin 50 (shared with Ethernet)
 * - MOSI → Pin 51 (shared with Ethernet)
 * - SCK  → Pin 52 (shared with Ethernet)
 * - CS   → Pin 4 (or any other free digital pin)
 *
 * Author: Renzo Mischianti
 * Website: https://www.mischianti.org
 * Date: 2025-10-07
 */

#include <SPI.h>
#include <Ethernet.h>
#include <SD.h>
#include <EMailSender.h>

// ========== CONFIGURATION - UPDATE THESE VALUES ==========

// Brevo SMTP Credentials
const char* BREVO_LOGIN = "<YOUR-BREVO-SMTP-LOGIN>";
const char* BREVO_PASSWORD = "<YOUR-BREVO-SMTP-KEY>";

// Email addresses
const char* EMAIL_FROM = "<YOUR-EMAIL-VERIFIED-IN-BREVO>";
const char* EMAIL_TO = "<RECEIVER-EMAIL>";

// Network configuration
byte mac[] = {0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED};

// SD Card configuration
const int SD_CS_PIN = 4; // Chip Select pin for the SD card module

// ========== END CONFIGURATION ==========

EMailSender emailSend(
  BREVO_LOGIN,
  BREVO_PASSWORD,
  EMAIL_FROM,
  "ArduinoLogger", // Sender name (no spaces)
  "smtp-relay.brevo.com",
  587
);

void setup() {
  Serial.begin(115200);
  while (!Serial) { ; }

  Serial.println("\n==================================================");
  Serial.println("Arduino Mega + Brevo Email with SD Attachment");
  Serial.println("==================================================\n");

  // Initialize Ethernet
  Serial.println("Initializing Ethernet...");
  if (Ethernet.begin(mac) == 0) {
    Serial.println("ERROR: DHCP configuration failed. Halting.");
    while (true);
  }
  Serial.println("✓ Ethernet connected!");
  Serial.print("  IP Address: ");
  Serial.println(Ethernet.localIP());
  delay(1500);

  // Initialize SD Card
  Serial.println("\nInitializing SD card...");
  if (!SD.begin(SD_CS_PIN)) {
    Serial.println("ERROR: SD card initialization failed! Check wiring and card format. Halting.");
    while (true);
  }
  Serial.println("✓ SD card ready.");

  // Send the email with an attachment
  sendEmailWithAttachment();
}

void loop() {
  Ethernet.maintain();
  delay(10000);
}

void sendEmailWithAttachment() {
  Serial.println("\n--- Sending Email with Attachment ---");

  // 1. Create a sample log file on the SD card
  Serial.println("Creating sample file 'datalog.txt' on SD card...");
  File dataFile = SD.open("datalog.txt", FILE_WRITE);
  if (dataFile) {
    dataFile.println("System Status Report");
    dataFile.print("Timestamp: ");
    dataFile.println(millis());
    dataFile.println("Temperature: 24.7 C");
    dataFile.println("Humidity: 55%");
    dataFile.println("Status: OK");
    dataFile.close();
    Serial.println("✓ File created successfully.");
  } else {
    Serial.println("ERROR: Failed to create file on SD card.");
    return;
  }

  // 2. Prepare the email message
  EMailSender::EMailMessage message;
  message.subject = "Daily System Report with Attachment";
  message.message = " Hello,\n\nPlease find the daily system log attached.\n\n- Arduino Monitoring System";
  message.mime = MIME_TEXT_PLAIN;

  // 3. Configure the attachment
  EMailSender::FileDescriptior fileDescriptor;
  fileDescriptor.filename = "datalog.txt";
  fileDescriptor.url = "/datalog.txt"; // Absolute path on the SD card
  fileDescriptor.mime = MIME_TEXT_PLAIN;
  fileDescriptor.storageType = EMailSender::EMAIL_STORAGE_TYPE_SD;
  fileDescriptor.encode64 = true; // Use Base64 encoding for reliability

  EMailSender::Attachments attachments;
  attachments.number = 1;
  attachments.fileDescriptor = &fileDescriptor;

  // 4. Send the email
  Serial.println("\nConnecting to Brevo SMTP server to send email...");
  EMailSender::Response resp = emailSend.send(EMAIL_TO, message, attachments);

  // 5. Print the result
  Serial.println("\n--- Result ---");
  Serial.print("Status Code: ");
  Serial.println(resp.code);
  Serial.print("Description: ");
  Serial.println(resp.desc);

  if (resp.status) {
    Serial.println("\n✓✓✓ EMAIL WITH ATTACHMENT SENT SUCCESSFULLY! ✓✓✓");
  } else {
    Serial.println("\n✗✗✗ EMAIL SENDING FAILED! ✗✗✗");
    Serial.println("\nTroubleshooting tips:");
    Serial.println(" - Double-check your Brevo credentials and sender email.");
    Serial.println(" - Ensure the SD card is working and the file path is correct.");
    Serial.println(" - Check your network connection and firewall settings.");
  }
  Serial.println("\n==================================================\n");
}

/*
 * EMailSender Library - Arduino UNO + Ethernet Shield + Brevo Basic Email
 *
 * This example shows how to send simple emails from Arduino UNO using minimal RAM.
 * Perfect for memory-constrained projects that need email notifications.
 *
 * MEMORY USAGE:
 * - RAM:   [======    ]  58.1% (used 1190 bytes from 2048 bytes)
 * - Flash: [=======   ]  70.8% (used 22832 bytes from 32256 bytes)
 * - No attachments to minimize memory usage (comment #define ENABLE_ATTACHMENTS in EMailSenderKey.h)
 *
 * WHY BREVO FOR ARDUINO UNO?
 * - No SSL/TLS required (UNO has only 2KB RAM)
 * - Port 587 with simple AUTH LOGIN
 * - 300 emails/day free tier
 *
 * HARDWARE:
 * - Arduino UNO R3
 * - W5100/W5500 Ethernet Shield
 * - Ethernet cable
 *
 * WIRING:
 * - Stack the shield on top of Arduino UNO
 * - MOSI → Pin 11, MISO → Pin 12, SCK → Pin 13, CS → Pin 10
 *
 * SETUP:
 * 1. Register at https://www.brevo.com
 * 2. Get SMTP credentials from SMTP & API settings
 * 3. Verify sender email address in Brevo dashboard
 * 4. Update credentials below
 *
 * Author: Renzo Mischianti
 * Website: https://www.mischianti.org
 * Library: https://github.com/xreef/EMailSender
 */

#include <SPI.h>
#include <Ethernet.h>
#include <EMailSender.h>

// ========== CONFIGURATION ==========
const char* BREVO_LOGIN = "your-login@smtp-brevo.com";
const char* BREVO_PASSWORD = "xsmtpsib-YOUR-API-KEY";
const char* EMAIL_FROM = "your-verified@example.com";
const char* EMAIL_TO = "recipient@example.com";
const char* SENDER_NAME = "ArduinoUNO";

byte mac[] = {0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED};

// Optional: Static IP (uncomment if needed)
// IPAddress ip(192, 168, 1, 177);
// IPAddress gateway(192, 168, 1, 1);
// IPAddress subnet(255, 255, 255, 0);

// ========== GLOBALS ==========
EMailSender emailSend(BREVO_LOGIN, BREVO_PASSWORD, EMAIL_FROM, SENDER_NAME, "smtp-relay.brevo.com", 587);

// ========== FUNCTIONS ==========
int freeRam() {
  extern int __heap_start, *__brkval;
  int v;
  return (int) &v - (__brkval == 0 ? (int) &__heap_start : (int) __brkval);
}

bool initializeEthernet() {
  Serial.println(F("Initializing Ethernet..."));

  if (Ethernet.begin(mac) == 0) {
    Serial.println(F("DHCP failed!"));
    #ifdef ip
    Ethernet.begin(mac, ip, gateway, subnet);
    #else
    return false;
    #endif
  }

  delay(1500);

  if (Ethernet.linkStatus() == LinkOFF) {
    Serial.println(F("No Ethernet cable!"));
    return false;
  }

  Serial.print(F("IP: "));
  Serial.println(Ethernet.localIP());
  return true;
}

void sendEmail() {
  Serial.println(F("\n--- Sending Email ---"));
  Serial.print(F("Free RAM: "));
  Serial.print(freeRam());
  Serial.println(F(" bytes"));

  EMailSender::EMailMessage message;
  message.subject = F("Arduino UNO + Brevo Test");
  message.message = F(" Hello from Arduino UNO!\n\n");
  message.message += F("This email was sent using:\n");
  message.message += F("- Arduino UNO R3\n");
  message.message += F("- Ethernet Shield\n");
  message.message += F("- Brevo SMTP (port 587)\n");
  message.message += F("- EMailSender Library\n\n");
  message.message += F("System Info:\n- Free RAM: ");
  message.message += String(freeRam());
  message.message += F(" bytes\n- Uptime: ");
  message.message += String(millis() / 1000);
  message.message += F(" sec\n\n");
  message.message += F("---\nby Renzo Mischianti\n");
  message.message += F("mischianti.org\n");
  message.mime = MIME_TEXT_PLAIN;

  Serial.print(F("From: "));
  Serial.println(EMAIL_FROM);
  Serial.print(F("To: "));
  Serial.println(EMAIL_TO);
  Serial.println(F("Connecting to Brevo..."));

  EMailSender::Response resp = emailSend.send(EMAIL_TO, message);

  Serial.println(F("\n--- Result ---"));
  Serial.print(F("Code: "));
  Serial.println(resp.code);
  Serial.print(F("Status: "));
  Serial.println(resp.status ? F("✓ OK") : F("✗ FAILED"));

  if (!resp.status) {
    Serial.print(F("Error: "));
    Serial.println(resp.desc);
  }
}

// ========== MAIN ==========
void setup() {
  Serial.begin(115200);
  while (!Serial);

  Serial.println(F("\n=============================="));
  Serial.println(F("Arduino UNO + Brevo"));
  Serial.println(F("==============================\n"));
  Serial.print(F("Free RAM: "));
  Serial.print(freeRam());
  Serial.println(F(" bytes"));

  if (!initializeEthernet()) {
    Serial.println(F("Network init failed!"));
    while (1) {
      delay(5000);
      if (initializeEthernet()) break;
    }
  }

  Serial.println(F("✓ Network ready!\n"));
  sendEmail();
  Serial.println(F("\n=== Setup Complete ==="));
}

void loop() {
  Ethernet.maintain();
  delay(10000);
}

==============================
Arduino UNO + Brevo
==============================

Free RAM: 634 bytes
Initializing Ethernet...
IP: 192.168.1.54
✓ Network ready!


--- Sending Email ---
Free RAM: 634 bytes
From: renzo.mischianti@gmail.com
To: renzo.mischianti@gmail.com
Connecting to Brevo...

--- Result ---
Code: 0
Status: ✓ OK

=== Setup Complete ===

EMailSender::EMailMessage message;
message.subject = "Test Email HTML";
message.message = "<h1>Ciao!</h1><p>Questa è un'email <b>HTML</b>.</p>";
message.mime = MIME_TEXT_HTML;  // Imposta il tipo MIME su HTML

// Destinatari multipli
const char* recipients[] = {
  "destinatario1@example.com",
  "destinatario2@example.com",
  "destinatario3@example.com"
};

EMailSender::Response resp = emailSend.send(recipients, 3, message);

// Array con indirizzi A, Cc e Ccn
const char* allRecipients[] = {
  "a@example.com",      // A (1)
  "cc@example.com",     // Cc (1)
  "ccn@example.com"     // Ccn (1)
};

// send(destinatari, numA, numCc, numCcn, messaggio)
EMailSender::Response resp = emailSend.send(allRecipients, 1, 1, 1, message);

// Abilita SSLClient interno in EMailSenderKey.h
#define EMAIL_ENABLE_INTERNAL_SSLCLIENT

// Usa la porta 587
EMailSender emailSend("utente@gmail.com", "password_app",
                      "utente@gmail.com", "Nome Mittente",
                      "smtp.gmail.com", 587);

// Abilita EHLO (richiesto per STARTTLS)
emailSend.setEHLOCommand(true);

// Usa WiFiClientSecure (ESP32/ESP8266)
EMailSender emailSend("utente@gmail.com", "password_app",
                      "utente@gmail.com", "Nome Mittente",
                      "smtp.gmail.com", 465);

// Nessuna configurazione aggiuntiva necessaria

#define EMAIL_ENABLE_OPENSLAB_SSLCLIENT

// La libreria userà SSLClient basato su BearSSL
// per connessioni sicure su Ethernet

// Usa AUTH PLAIN (SASL)
emailSend.setSASLLogin(true);

// Usa CRAM-MD5 (solo ESP32)
emailSend.setCramMD5Login(true);

// Disabilita l'autenticazione (open relay)
emailSend.setUseAuth(false);

// Usa EHLO invece di HELO (raccomandato per server moderni)
emailSend.setEHLOCommand(true);

// Imposta un identificatore personalizzato per HELO/EHLO
emailSend.setPublicIpDescriptor("miodispositivo");

#include <SD.h>

// Inizializza la scheda SD
SD.begin(SD_CS_PIN);

// Prepara l'allegato
EMailSender::FileDescriptior fileDescriptor;
fileDescriptor.filename = "foto.jpg";
fileDescriptor.url = "/foto.jpg";  // Percorso sulla scheda SD
fileDescriptor.mime = MIME_IMAGE_JPG;
fileDescriptor.encode64 = true;  // Codifica in Base64
fileDescriptor.storageType = EMailSender::EMAIL_STORAGE_TYPE_SD;

EMailSender::Attachments attachments;
attachments.number = 1;
attachments.fileDescriptor = &fileDescriptor;

// Invia email con allegato
EMailSender::Response resp = emailSend.send("destinatario@example.com",
                                            message,
                                            attachments);

EMailSender::FileDescriptior files[3];

files[0].filename = "documento.pdf";
files[0].url = "/docs/documento.pdf";
files[0].mime = "application/pdf";
files[0].encode64 = true;
files[0].storageType = EMailSender::EMAIL_STORAGE_TYPE_SD;

files[1].filename = "immagine.png";
files[1].url = "/images/immagine.png";
files[1].mime = MIME_IMAGE_PNG;
files[1].encode64 = true;
files[1].storageType = EMailSender::EMAIL_STORAGE_TYPE_SD;

files[2].filename = "dati.txt";
files[2].url = "/dati.txt";
files[2].mime = MIME_TEXT_PLAIN;
files[2].encode64 = false;
files[2].storageType = EMailSender::EMAIL_STORAGE_TYPE_SD;

EMailSender::Attachments attachments;
attachments.number = 3;
attachments.fileDescriptor = files;

EMailSender::Response resp = emailSend.send("destinatario@example.com",
                                            message,
                                            attachments);

#include <SPIFFS.h>

// Inizializza SPIFFS
SPIFFS.begin();

EMailSender::FileDescriptior fileDescriptor;
fileDescriptor.filename = "config.json";
fileDescriptor.url = "/config.json";
fileDescriptor.mime = "application/json";
fileDescriptor.encode64 = false;
fileDescriptor.storageType = EMailSender::EMAIL_STORAGE_TYPE_SPIFFS;

// O usa LittleFS
// fileDescriptor.storageType = EMailSender::EMAIL_STORAGE_TYPE_LITTLE_FS;

// O usa FFAT
// fileDescriptor.storageType = EMailSender::EMAIL_STORAGE_TYPE_FFAT;

// fileDescriptor.storageType = EMailSender::EMAIL_STORAGE_TYPE_SPIFM;

String jsonData = "{\"device\":\"ESP32\",\"temp\":22.5,\"hum\":65.3}";

EMailSender::FileDescriptior files[1];

// Allegato JSON
files[0].filename = "data.json";
files[0].mime = "application/json";
files[0].storageType = EMailSender::EMAIL_STORAGE_TYPE_STRING;
files[0].content = jsonData;

Stream* myDataStream = ...; // La tua implementazione di Stream
size_t dataSize = 1024;     // Dimensione dei dati in byte

EMailSender::FileDescriptior fileDescriptor;
fileDescriptor.filename = "sensor_data.csv";
fileDescriptor.mime = "text/csv";
fileDescriptor.encode64 = false;
fileDescriptor.storageType = EMailSender::EMAIL_STORAGE_TYPE_STREAM;
fileDescriptor.stream = myDataStream;      // Puntatore allo Stream
fileDescriptor.streamSize = dataSize;      // La dimensione è richiesta!

// If you want to ENABLE the internal SSLClient wrapper (needed for STARTTLS on port 587)
// instead of relying solely on the native secure client (e.g., WiFiClientSecure for 465),
// uncomment the following define. Enabling it increases flash and RAM usage
// but provides STARTTLS support on non-secure base clients.
//#define EMAIL_ENABLE_INTERNAL_SSLCLIENT

// Enable integration with OPEnSLab-OSU SSLClient (BearSSL) per AVR/Ethernet o schede che ne hanno bisogno.
// Usa questo backend solo se hai INSTALLATO la libreria esterna "SSLClient" (OPEnSLab-OSU).
// STARTTLS (porta 587) NON è supportato da questo backend; è pensato per TLS implicito (465) su Client non-SSL.
// Di default DISABILITATO: abilitalo nel tuo sketch o nelle build flags definendo
//   - EMAIL_ENABLE_EXTERNAL_SSLCLIENT_OPENSLAB (preferito) oppure
//   - EMAIL_ENABLE_OPENSLAB_SSLCLIENT
// #define EMAIL_ENABLE_OPENSLAB_SSLCLIENT

EMailSender(const char* email_login,
            const char* email_password);

EMailSender(const char* email_login,
            const char* email_password,
            const char* email_from);

EMailSender(const char* email_login,
            const char* email_password,
            const char* email_from,
            const char* name_from);

EMailSender(const char* email_login,
            const char* email_password,
            const char* email_from,
            const char* name_from,
            const char* smtp_server,
            uint16_t smtp_port);

void setSMTPServer(const char* smtp_server);
void setSMTPPort(uint16_t smtp_port);
void setEMailLogin(const char* email_login);
void setEMailFrom(const char* email_from);
void setNameFrom(const char* name_from);
void setEMailPassword(const char* email_password);

void setUseAuth(bool useAuth);
void setEHLOCommand(bool useEHLO);
void setSASLLogin(bool isSASLLogin);
void setCramMD5Login(bool onoff);  // Solo ESP32

void setPublicIpDescriptor(const char* descriptor);
void setAdditionalResponseLineOnConnection(uint8_t numLines);
void setAdditionalResponseLineOnHELO(uint8_t numLines);

// Destinatario singolo
Response send(const char* to, EMailMessage &email, Attachments att = {0, 0});
Response send(String to, EMailMessage &email, Attachments att = {0, 0});

// Destinatari multipli (Solo A)
Response send(const char* to[], byte sizeOfTo, EMailMessage &email, Attachments att = {0, 0});
Response send(String to[], byte sizeOfTo, EMailMessage &email, Attachments att = {0, 0});

// Destinatari multipli con Cc
Response send(const char* to[], byte sizeOfTo, byte sizeOfCc, EMailMessage &email, Attachments att = {0, 0});

// Destinatari multipli con Cc e Ccn
Response send(const char* to[], byte sizeOfTo, byte sizeOfCc, byte sizeOfCCn, EMailMessage &email, Attachments att = {0, 0});

// Messaggio Email
struct EMailMessage {
    String mime = "text/html";  // o "text/plain"
    String subject;
    String message;
};

// Descrittore File per Allegati
struct FileDescriptior {
    StorageType storageType = EMAIL_STORAGE_TYPE_SD;
    String mime;
    bool encode64 = false;
    String filename;
    String url;  // Percorso del file
};

// Allegati
struct Attachments {
    byte number;
    FileDescriptior *fileDescriptor;
};

// Risposta
struct Response {
    String code;
    String desc;
    bool status = false;
};

enum StorageType {
    EMAIL_STORAGE_TYPE_SPIFFS,
    EMAIL_STORAGE_TYPE_LITTLE_FS,
    EMAIL_STORAGE_TYPE_FFAT,
    EMAIL_STORAGE_TYPE_SPIFM,
    EMAIL_STORAGE_TYPE_SD
};

MIME_TEXT_HTML    // "text/html"
MIME_TEXT_PLAIN   // "text/plain"
MIME_IMAGE_JPG    // "image/jpg"
MIME_IMAGE_PNG    // "image/png"

// Abilita il supporto STARTTLS con SSLClient interno (ESP32/ESP8266)
#define EMAIL_ENABLE_INTERNAL_SSLCLIENT

// Abilita OpenSLab SSLClient per shield Ethernet (Arduino/STM32)
#define EMAIL_ENABLE_OPENSLAB_SSLCLIENT

// Abilita il supporto per gli allegati
#define ENABLE_ATTACHMENTS

// Abilita la gestione dell'header della data
#define MANAGE_DATE_HEADER

// Tipo di rete (rilevato automaticamente in base alla piattaforma)
// EMAIL_NETWORK_TYPE può essere:
// - NETWORK_ESP8266 (ESP8266 WiFi)
// - NETWORK_ESP32 (ESP32 WiFi)
// - NETWORK_W5100 (Ethernet W5100/W5200/W5500)
// - NETWORK_ENC28J60 (Ethernet ENC28J60)
// - NETWORK_WiFiNINA (SAMD/Arduino WiFiNINA)
// - ecc.

// Tipi di archiviazione
// INTERNAL_STORAGE può essere: STORAGE_SPIFFS, STORAGE_LITTLEFS, STORAGE_FFAT
// EXTERNAL_STORAGE può essere: STORAGE_SD, STORAGE_SDFAT2

#define EMAIL_SENDER_DEBUG
#define DEBUG_PRINTER Serial