Electronic, 3D printing and embedded programming
I’m going to publish my LoRa shield for WeMos LOLIN32. This is one of my favorite microcontrollers, and until now, I have been using a simplified version of shield for rapid prototyping, but in the end, I created a more complete version, and I share it with everyone.
I must fill a tank 1.5 km away, so I create a 2-part controller.
A server with a relay to manage the pump and a client solar/battery-powered to check the tank’s status and notify to the server.
Now we put all the Client components in the relative Case.
I must fill a tank 1.5 km away, so I create a 2-part controller.
A server with a relay to manage the pump and a client solar/battery-powered to check the tank’s status and notify to the server.
Now we put all the Server components in the relative Case.
I must fill a tank 1.5 km away, so I create a 2-part controller.
A server with a relay to manage the pump and a client solar / battery-powered to check the tank’s status and notify It to the server.
Here we are going to assemble the Client PCB.
I must fill a tank 1.5 km away, so I create a 2-part controller.
A server with a relay to manage the pump and a client solar/battery-powered to check the tank’s status and notify the status to the server.
We are going to assemble the Server PCB.
I must fill a tank 1.5 km away, so I create a 2-part controller.
A server with a relay to manage the pump and a client solar/battery-powered to check the tank’s status and notify the status to the server.
Here we are going to look at the Client software.
I must fill a tank 1.5 km away, so I create a 2-part controller.
A server with a relay to manage the pump and a client solar/battery-powered to check the tank’s status and notify the server’s status.
Here, we are going to look at the Server software.
In this article, we look at the Wake On Radio (WOR), one of the essential features of our Ebyte E220 UART LoRa device based on LLCC68 Wireless Modules.
Then we understand how to manage complex structures that are better optimized than string format data.
I have to fill a tank 1.5 km away, so I create a 2-part controller.
A server with a relay to manage the pump and a client solar/battery-powered to check the tank’s status and notify the server’s status.
Here is a little introduction to the project with the list of devices and libraries.
In this article we try to examine better how to configure the Ebyte E220 UART LoRa device based on LLCC68 Wireless Modules.
