[BeePrint enhancement] Gcode shell for stepper calibrating

[Alberto]

There’s a chanche of getting a gcode shell (or something for step calibratiion of axis and extruder) on Beeprint?
Using an external program like Repetier Host o similiar only for 10 minutes of work is odd..
Thanks again for the great work you are doing!

[Renzo Mischianti]

Hi Alberto,
In the latest version, you can find a GCode sender, but if you add the procedure to do calibration, we can think about a specified widget to automate that process.
Bye Renzo

[Author]

Posts