Hi,
first, great work. Currently I'm searching my wire problem because I´ve got the error
"No response from device! (Check wiring)" with the script ArduinoSetConfiguration.
Is it possible to update your layout picture to version 1.4?
bye,
Alexander
with
#define FREQUENCY_868
LoRa_E32 e32ttl100(D3,D4,D5,D7,D8); // both jumper to P
20:50:20.230 -> ⸮⸮⸮Init AUX pin!
20:50:20.806 -> Init M0 pin!
20:50:20.806 -> Init M1 pin!
20:50:20.840 -> Begin ex
20:50:20.840 -> Begin Software Serial
20:50:20.874 -> Begin
20:50:20.874 -> MODE NORMAL!
20:50:20.874 -> AUX HIGH!
20:50:20.874 -> Complete!
20:50:20.941 -> MODE PROGRAM/SLEEP!
20:50:20.941 -> AUX HIGH!
20:50:20.974 -> Complete!
20:50:20.974 -> 3
20:50:22.034 -> Available buffer: 0 structure size: 6
20:50:22.068 -> ----------------------------------------
20:50:22.101 -> HEAD : 0 0 0
20:50:22.101 ->
20:50:22.134 -> AddH : 0
20:50:22.134 -> AddL : 7
20:50:22.134 -> Chan : 60 -> 922MHz
20:50:22.168 ->
20:50:22.168 -> SpeedParityBit : 0 -> 8N1 (Default)
20:50:22.201 -> SpeedUARTDatte : 0 -> 1200bps
20:50:22.234 -> SpeedAirDataRate : 1 -> 1.2kbps
20:50:22.268 -> OptionTrans : 1 -> Fixed transmission (first three bytes can be used as high/low address and channel)
20:50:22.403 -> OptionPullup : 1 -> TXD, RXD, AUX are push-pulls/pull-ups
20:50:22.470 -> OptionWakeup : 110 -> 1750ms
20:50:22.504 -> OptionFEC : 0 -> Turn off Forward Error Correction Switch
20:50:22.571 -> OptionPower : 1 -> 17dBm
20:50:22.604 -> ----------------------------------------
20:50:22.637 -> MODE NORMAL!
20:50:22.671 -> AUX HIGH!
20:50:22.671 -> Complete!
20:50:22.706 -> No response from device! (Check wiring)
20:50:22.740 -> 12
20:50:22.740 -> ----------------------------------------
20:50:22.775 -> HEAD : 0 0 0
20:50:22.808 ->
20:50:22.808 -> AddH : 0
20:50:22.808 -> AddL : 111
20:50:22.808 -> Chan : 60 -> 922MHz
20:50:22.841 ->
20:50:22.841 -> SpeedParityBit : 0 -> 8N1 (Default)
20:50:22.875 -> SpeedUARTDatte : 0 -> 1200bps
20:50:22.909 -> SpeedAirDataRate : 1 -> 1.2kbps
20:50:22.977 -> OptionTrans : 1 -> Fixed transmission (first three bytes can be used as high/low address and channel)
20:50:23.078 -> OptionPullup : 1 -> TXD, RXD, AUX are push-pulls/pull-ups
20:50:23.146 -> OptionWakeup : 110 -> 1750ms
20:50:23.181 -> OptionFEC : 0 -> Turn off Forward Error Correction Switch
20:50:23.249 -> OptionPower : 1 -> 17dBm
20:50:23.284 -> ----------------------------------------
20:50:23.353 -> MODE PROGRAM/SLEEP!
20:50:23.353 -> AUX HIGH!
20:50:23.388 -> Complete!
20:50:23.388 -> 3
20:50:23.388 -> AUX HIGH!
20:50:23.388 -> Complete!
20:50:23.423 -> Clear buffer...ok!
20:50:23.423 -> ----------------------------------------
20:50:23.493 -> HEAD BIN INSIDE: 11000010 194 C2
20:50:23.527 -> ----------------------------------------
20:50:23.561 -> MODE NORMAL!
20:50:23.595 -> AUX HIGH!
20:50:23.595 -> Complete!
20:50:23.595 -> Success
20:50:23.595 -> 1
20:50:23.629 -> ----------------------------------------
20:50:23.663 -> HEAD : 0 0 0
20:50:23.663 ->
20:50:23.663 -> AddH : 1
20:50:23.698 -> AddL : 0
20:50:23.698 -> Chan : 6 -> 868MHz
20:50:23.698 ->
20:50:23.698 -> SpeedParityBit : 0 -> 8N1 (Default)
20:50:23.733 -> SpeedUARTDatte : 111 -> 115200bps
20:50:23.768 -> SpeedAirDataRate : 11 -> 4.8kbps
20:50:23.801 -> OptionTrans : 0 -> Transparent transmission (default)
20:50:23.870 -> OptionPullup : 1 -> TXD, RXD, AUX are push-pulls/pull-ups
20:50:23.938 -> OptionWakeup : 100 -> 1250ms
20:50:23.973 -> OptionFEC : 0 -> Turn off Forward Error Correction Switch
20:50:24.074 -> OptionPower : 1 -> 17dBm
20:50:24.108 -> ----------------------------------------
