LoRa E32 HEAD code not corresponding

Home › Forums › The libraries hosted on the site › EByte LoRa e32 UART devices sx1262/sx1268 › LoRa E32 HEAD code not corresponding

Viewing 1 reply thread
  • Author
    Posts
    • 18 July 2023 at 22:46 #26787
      ilgiovaa
      Participant

        Hi everyone, my project suddenly broke apart.
        I’ve been trying to connect via LoRa E32 (433T30D modules) two arduinos and I had managed to do so; but yesterday, without changing anything in my sketches it stopped working. I immediately tried to reset the modules with the example code but nothing has changed by then. Both channel, ADDH and ADDL are the same (I’ve left the configuration code unchanged): the only difference between the two printed configuration is the HEAD number. Does this difference matters to the communication between the two? if yes, how can I fix this? Thanks a lot for your help.

      • 24 July 2023 at 08:05 #26848
        Renzo Mischianti
        Keymaster

          Hi ilgiovaa,
          It’s possible that there is some problem with the power supply during operation, and It generates a wrong status on the device.
          Try to put a better power supply and retry.
          Bye Renzo

      • Author
        Posts
      Viewing 1 reply thread
      • You must be logged in to reply to this topic.
      Exit mobile version