T-Display-S3 with E220

Hello, I am trying to connect a T-Display-S3 to a Lora Ebyte E220. It doesn't matter if I connect it to the serial port (pins 17 and 18); I tried with Hardware Serial, but it didn't work either. I have tested several pins, but I can't get it to work with the LilyGo T-Display S3. I have managed to make it work perfectly with two other ESP32 references, but I cannot do it with this one (I am very new to electronics). Any help would be greatly appreciated. Here is the link to the ESP32 board I am using, and the code I am trying to apply is the example that comes with the library. Board: https://www.lilygo.cc/products/t-display-s3