TFT24 locking up when job cancelled

Home › Forums › The projects hosted on the site › MKS WiFi firmware and BeePrint web interface › TFT24 locking up when job cancelled

Viewing 2 reply threads
  • Author
    Posts
    • 27 March 2022 at 11:46 #19787
      Mike

        MKS TFT24 V1.1 & SKR V1.3 I am using the win8 scheme if it makes a difference.
        If I press the stop print after starting any job it locks the tft up – leaving the heaters ON! could anyone else confirm or dispute this please?

      • 27 March 2022 at 18:59 #19793
        Renzo Mischianti
        Keymaster

          Hi,
          Do the other commands works correctly?
          Bye Renzo

          • 31 March 2022 at 18:50 #19949
            Mike

              Yes, the screen appears to work correctly…until I cancel a running job, then nothing responds to any screen touch and the only way out is power cycle or reset the SKR control board. It does this when using either BeePrint web interface and using the touch screen icons. I am not sure this is related to the BeePrint firmware or not – hence my asking if others have the same symptoms.

          • 31 March 2022 at 22:08 #19952
            Renzo Mischianti
            Keymaster

              Hi Mike,
              No no other people have this issue. Probably is the firmware of the printer.
              Bye Renzo

          • Author
            Posts
          Viewing 2 reply threads
          • You must be logged in to reply to this topic.
          Exit mobile version