WOR Mode1 and Mode 2 current?

[William]

What is the typical, current comsumption for WOR Mode 1 and Mode 2?

Trying to meter WOR Mode 1 and Mode 2 current; Measuring Mode 1 anywhere from 15 uA at the start of measuring to 90 uA later in the readings. Mode 2 (sleep) I measure ~ 1 uA some lowwer uA.

Have you measured WOR Mode 1 and Mode 2 currents?

Checked the E220-900T30D User Manual; did not find any info on WOR Mode 1 and Mode 2 current.

William

[William]

I am seeing one steady and three fast changing currents; meter was inserted in +5 volt supply for the E220-900T30D:

11.6 mA Mode 0? ESP32 awake
79-69 µA Mode 1? ESP32 deep sleep
60-59 µA Mode 2? ESP32 wakeup message
1.01 – .26 µA Mode 3? ESP32 deep sleep

WOR Cycle is set to WOR_4000_111.

Have I made correct observations of Modes?

William

• This reply was modified 1 year, 7 months ago by William. Reason: Changed Mode 2 ESP32 Description

[Renzo Mischianti]

Hi William,
Sorry, I lost the first message on this topic.
But I don’t have any measurements for esp32 and E220, but as described here
ESP32 practical power saving: deep sleep and hibernation – 3
remember that there are several differences between the different prototype boards.
Bye Renzo

[Author]

Posts