I’d like to renew my CNC for PCB, I select a project called Cyclone PCB Factory to start.
But I think there are some issue on the mechanic, and I need more features to use It with simplicity, so I start to fix, one of the most important features is T-track to hold PCB (and if needed simplify the double side milling).
I use standard Cyclone base but I put over T-track.
3D Model
Printed parts
I create 2 version of the base one as unique piece (but with lengt of 215cm) and one divided in 2 piece for smaller 3D printer bed.
T-track at work
Material
I use M3 screw for all and I had 4 Adjusting Nut For Hot Bed.
You can find here AliExpress
And in addition with the slider you obtain this T-track screw to fix holder.
The slider enter inside the track and you can move It up and down.
Download
- Base big (one piece)
- Base left and base right (two piece)
- Slider for M3 screw
- All holder