Site icon Renzo Mischianti

3D Printed Modular Holder System: esp32-cam housing – 2

Spread the love

3d printed Modular System ESP32-CAM holder

I use the esp32-cam a lot to monitor my devices around the house, so here is the housing compatible with my 3D printed modular system.

For my octoprint I use an esp32-cam,

3d printed Modular System esp32-cam on Anet A8 for octoprint
3d printed Modular System screw esp32-cam on octoprint

or to poor to place the tip of my CNC in the other room (I connect it with Bluetooth as you can see in this article “CNC Cyclone PCB Factory: control panel and bluetooth” for more information)

3d printed Modular System round base and esp32-cam holder spy my CNC

and I use it to have more perspectives on my videos.

So here the STL of the housing.

ESP32-Cam housing

ESP32-Cam housing  

ESP32-Cam rear of the housing

ESP32-Cam rear of the housing 

Assembly

3d printed Modular System esp32-cam module assembly in case

You can find ESP32-CAM It here on ESP32 Dev Kit v1 - TTGO T-Display 1.14 ESP32 - NodeMCU V3 V2 ESP8266 Lolin32 - NodeMCU ESP-32S - WeMos Lolin32 - WeMos Lolin32 mini - ESP32-CAM programmer - ESP32-CAM bundle - ESP32-WROOM-32 - ESP32-S

To make the external connection, you need to use a micro-usb to dip adapter

You can find the USB adapter here AliExpress

And here the result

3d printed Modular System screw esp32-cam first assembly

And refer to the article “ESP32-CAM: pinout, specs and Arduino IDE configuration” to upload the sketch.

Thanks

  1. 3D Printed Modular Holder System: basic elements
  2. 3D Printed Modular Holder System: esp32-cam housing
  3. 3D Printed Modular Holder System: Logitech c270 holder
  4. 3D Printed Modular Holder System: USB lamp
  5. 3D Printed Modular Holder System: rechargeable battery holder
  6. […]

Spread the love
Exit mobile version