CrowPanel ESP32-S3 4.2” E-paper HMI Display: high-resolution pinout, datasheet and specs
CrowPanel ESP32-S3 4.2” E-paper HMI Display: high-resolution pinout, datasheet and specs
Tagged: Display
Integrating Touch Screen Functionality with Your ILI9341 TFT Display
Building on our ILI9341 and TFT_eSPI setup, this article adds touchscreen support to create interactive interfaces. With touch input, you can enhance your ESP32 projects with buttons, keypads, and controls for a more dynamic user experience.
Complete Guide: Using an ILI9341 Display with the TFT_eSPI Library
This comprehensive guide explains how to use an ILI9341 TFT display with the optimized TFT_eSPI library on ESP32 and similar boards. It covers wiring, library installation, configuration, and provides detailed code examples for drawing shapes, text, images, animations, and troubleshooting. It also outlines next steps, including touchscreen integration and advanced display features. Learn to customize your projects.
Checking Battery Capacity with Arduino: Temperature Monitoring and Type Selection
Here is my Arduino battery tester, designed to explore the performance of various types of batteries, including 18650 and acid-based ones. Successfully tested even with a 6V lead-acid battery with a capacity of 4.2A, this device provides battery capacity readings in milliampere-hours. In fact, it’s an old article that I had never published before, but I have revisited and decided to publish it now.
RasPad 3: transform your Raspberry Pi into a versatile tablet with multi-OS boot
The article provides an overview of the SunFounder RasPad 3, a device that converts a Raspberry Pi into a versatile tablet. It covers the assembly process, including integrating a Raspberry Pi 4 and an M2. SSD. The guide concludes with instructions for setting up a multi-boot system using PINN, allowing users to alternate between various operating systems for different applications.
Night Vision on Raspberry Pi: TS7-Pro Display, PiPower & DIY 3D Printed Battery in Action!
What started as a simple review of the TS7-Pro display for a project, has evolved into a comprehensive examination of a Raspberry Pi setup. This setup features the TS7-Pro display, a night vision camera, a SunFounder PiPower module, and a DIY 3D printed rechargeable battery pack. Witness how the night vision camera effectively captures detailed images, even in low-light conditions.
LoRa remote water level and pump controller (esp8266): Server PCB – 4
I must fill a tank 1.5 km away, so I create a 2-part controller.
A server with a relay to manage the pump and a client solar/battery-powered to check the tank’s status and notify the status to the server.
We are going to assemble the Server PCB.
LoRa remote water level and pump controller (esp8266): server software – 2
I must fill a tank 1.5 km away, so I create a 2-part controller.
A server with a relay to manage the pump and a client solar/battery-powered to check the tank’s status and notify the server’s status.
Here, we are going to look at the Server software.
SSD1306 OLED Display: draw images, splash and animations – 2
SSD1306 IC is used for the most commons OLED display is a single-chip CMOS OLED/PLED driver with controller for organic / polymer light emitting diode dot-matrix graphic display system. It consists of 128 segments and 64 commons.
We will now render images and create a simple animation and take a look at the byte array generator.
SDD1306 OLED display: wiring and basic use with esp8266, esp32 and Arduino – 1
SSD1306 IC is used for the most commons OLED display is a single-chip CMOS OLED/PLED driver with controller for organic / polymer light emitting diode dot-matrix graphic display system. It consists of 128 segments and 64 commons.
We are going to use it with SPI and i2c and learn the basic function.
