Electronic, 3D printing and embedded programming
I want to modify the WiFi module firmware of my FlyingBear Ghost 5 to support the Web Socket protocol and I want to develop the web interface as well.
In this article I would like to say a few things about the Makerbase Robin Nano board hardware and interfacing with the WiFi module.
OTA (Over the Air) update is the process of uploading firmware to an ESP module using a Wi-Fi.
In this article we are going to explain OTA updates via Web Borwser with a custom web page.
I bought an Alexa device and since then I don’t want to press a button anymore and I want to turn all my devices into voice control.
We have reached the last phase, now we have to go and test our smart home skill on a device, this must first be enabled and linked to your Amazon developer account.
OTA (Over the Air) update is the process of uploading firmware to an ESP module using a Wi-Fi.
In this article we are going to explain OTA via Web Borwser of signed firmware and HTTPS with self signed certificate.
I bought an Alexa device and since then I don’t want to press a button anymore and I want to turn all my devices into voice control. So I start this tutorial to explain how to create a simple custom Smart Home Skill.
In this article we upload the Lambda sample code, it must first be packaged and then uploaded to AWS as a function code.
NodeMCU v2 and v2.1 high resolution pinout and specs
OTA (Over the Air) update is the process of uploading firmware to an ESP module using a Wi-Fi. In this article we will explain how to make OTA updates via Web Browser, with and without basic authentication.
I bought an Alexa device and since then I don’t want to press a button anymore and I want to turn all my devices into voice control. So I start this tutorial to explain how to create a simple custom Smart Home Skill.
Now It’s time to create a new Amazon DynamoDB Table that will hold the state of the virtual switch.
OTA (Over the Air) update is the process of uploading firmware to an ESP module using a Wi-Fi connection rather than a serial port. Such functionality becomes extremely useful in case of limited or no physical access to the module.
In this article we are going to see the OTA updates with the Arduino IDE, firmware, filesystem, signed and unsigned.
I bought an Alexa device and since then I don’t want to press a button anymore and I want to turn all my devices into voice control. So I start this tutorial to explain how to create a simple custom Smart Home Skill.
In this article we are going to connect our Skill to the Lambda.
To keep this site free, I use affiliate links. If you buy through these links, I receive a small commission at no extra cost to you. It’s a simple way to support my work. Thank you!
