Electronic, 3D printing and embedded programming
SSD1306 IC is used for the most commons OLED display is a single-chip CMOS OLED/PLED driver with controller for organic / polymer light emitting diode dot-matrix graphic display system. It consists of 128 segments and 64 commons.
We will now render images and create a simple animation and take a look at the byte array generator.
I finally buy another 3D printer, this time I choiche the FlyingBear Gost 5, and I made a case because I would like to print a more dangerous material like ABS, and to do that I create two different backs of the top cover, one standard and one with a fan for extracting harmful fumes. Fron cover/panel.
I finally buy another 3D printer, this time I choiche the FlyingBear Gost 5, and I made a case because I would like to print a more dangerous material like ABS, and to do that I create two different backs of the top cover, one standard and one with a fan for extracting harmful fumes. Top cover.
And now a new update for my Simple FTP Server library. Ideal for creating an FTP server on various devices (esp8266, esp32, Arduino Ethernet, WiFi NiNa etc) and filesystems (FAT, SPIFFS, LittleFS etc.). Here is the guide to use this library on Wio Terminal.
Wio Terminal is a complete system, compared to a normal development board it is equipped with screen + development board + input / output interface + container, which makes it an efficient product and ready for the final product.
Here my introduction and briefly how to use tutorial.
SSD1306 IC is used for the most commons OLED display is a single-chip CMOS OLED/PLED driver with controller for organic / polymer light emitting diode dot-matrix graphic display system. It consists of 128 segments and 64 commons.
We are going to use it with SPI and i2c and learn the basic function.
The new generation of Arduino’s board is very interesting. Powerful CPU and high level connectivity, dedicated cryptography chip to manage all IoT environment. But become also more complex than previous boards.
Arduino MKR WiFi 1010 high resolution pinout and specs
I would like to write a step by step tutorial on how to create an Alexa Smart Home Skill from scratch. So we present all the prerequisites and the step to create a Smart Home Skill connected to our microcontroller to manage all kinds of devices.
We will learn how to query table with the JavaScript SDK v2 and v3.
I’m going to use the esp32, and the first problem was how to put It on breadboard, so we are going to print an adapter, then I build a PCB to program.
To keep this site free, I use affiliate links. If you buy through these links, I receive a small commission at no extra cost to you. It’s a simple way to support my work. Thank you!
