TP4056 LiPo battery charger: high-resolution pinout, datasheet, and specs
TP4056 LiPo battery charger: high-resolution pinout, datasheet, and specs
Category: Recharging
Checking Battery Capacity with Arduino: Temperature Monitoring and Type Selection
Here is my Arduino battery tester, designed to explore the performance of various types of batteries, including 18650 and acid-based ones. Successfully tested even with a 6V lead-acid battery with a capacity of 4.2A, this device provides battery capacity readings in milliampere-hours. In fact, it’s an old article that I had never published before, but I have revisited and decided to publish it now.
LineaMeteoStazione: Technical Guide Display – 2
This starting guide will talk about how it works LineaMeteoStazione, a bit more technically speaking.
Technical Guide Display.
LineaMeteoStazione: Technical Guide Master Device, Sending and Collecting Data – 1
This starting guide will talk about how it works LineaMeteoStazione, a bit more technically speaking.
Technical Guide Master Device, Sending and Collecting Data.
ABB Aurora web inverter monitor (WIM): set time and manage battery UPS – 5
I’d like to monitoring my ABB Aurora inverter. So with an WeMos D1 mini I create a centraline with web interface, notification and other.
Here we are going to explore how to create an UPS and how correctly set date.
Voltage divider: calculator and application
Voltage divider It’s a circuit very common in electronic, I add a simple calculator and some application in this article.
Emergency power bank homemade
When you need a power bank probably you have all the component at home, I had a problem and I had to make one quick.
