Category: EBYTE LoRa E32

0

LoRa remote water level and pump controller (ReWaL): Client PCB – 5

I must fill a tank 1.5 km away, so I create a 2-part controller.
A server with a relay to manage the pump and a client solar / battery-powered to check the tank’s status and notify It to the server.
Here we are going to assemble the Client PCB.

2

LoRa remote water level and pump controller (esp8266): Server PCB – 4

I must fill a tank 1.5 km away, so I create a 2-part controller.
A server with a relay to manage the pump and a client solar/battery-powered to check the tank’s status and notify the status to the server.
We are going to assemble the Server PCB.

0

LoRa remote water level and pump controller (ReWaL): client software – 3

I must fill a tank 1.5 km away, so I create a 2-part controller.
A server with a relay to manage the pump and a client solar/battery-powered to check the tank’s status and notify the status to the server.
Here we are going to look at the Client software.

0

LoRa remote water level and pump controller (esp8266): server software – 2

I must fill a tank 1.5 km away, so I create a 2-part controller.
A server with a relay to manage the pump and a client solar/battery-powered to check the tank’s status and notify the server’s status.
Here, we are going to look at the Server software.

0

LoRa remote water tank level and pump controller (ReWaL): intro – 1

I have to fill a tank 1.5 km away, so I create a 2-part controller.
A server with a relay to manage the pump and a client solar/battery-powered to check the tank’s status and notify the server’s status.
Here is a little introduction to the project with the list of devices and libraries.

0

EByte LoRa E32 gateway: manage via REST and WebSocket (esp8266, esp32) – 1

I do many projects with EByte LoRa E32, all based on my library, and many people download it, but EByte’s tools are very poor and sometimes faulty. So I tried to create a Web manager that also works as a Gateway, here’s how to interface the Back End.

9

Ebyte LoRa E32 device for Arduino, esp32 or esp8266: WOR (wake on radio) microcontroller and new WeMos D1 mini shield – Part 7

Here a tutorial on E32 LoRa (Long Range) device very cheap and very long range (from 3Km to 8Km).
In this chapter we are going to wake on radio the LoRa E32 and microcontroller and we show the WeMos D1 mini shield created for this device.

Exit mobile version