Category: LoRa wireless remote water tank and pump controller (ReWaL)

A project to manage remote water tank level and a local pump.
Server with a relay to manage the pump, and a client solar/battery powered to check the status of the tank and and notify the status to the server.

0

3D Printer / EBYTE LoRa E32 / esp8266 / LoRa wireless remote water tank and pump controller (ReWaL) / My PCB

 by · Published 7 July 2022 · Last modified 20 August 2024

LoRa remote water level and pump controller (ReWaL): assemble client and 3D printed case – 7

I must fill a tank 1.5 km away, so I create a 2-part controller.
A server with a relay to manage the pump and a client solar/battery-powered to check the tank’s status and notify to the server.

Now we put all the Client components in the relative Case.

0

3D Printer / EBYTE LoRa E32 / esp8266 / LoRa wireless remote water tank and pump controller (ReWaL) / My PCB / Project

 by · Published 26 June 2022 · Last modified 20 August 2024

LoRa remote water level and pump controller (ReWaL): assemble server and 3D printed case – 6

I must fill a tank 1.5 km away, so I create a 2-part controller.
A server with a relay to manage the pump and a client solar/battery-powered to check the tank’s status and notify to the server.

Now we put all the Server components in the relative Case.

0

EBYTE LoRa E32 / esp8266 / LoRa wireless remote water tank and pump controller (ReWaL) / My PCB / Project / Voltage divider

 by · Published 15 June 2022 · Last modified 20 August 2024

LoRa remote water level and pump controller (ReWaL): Client PCB – 5

I must fill a tank 1.5 km away, so I create a 2-part controller.
A server with a relay to manage the pump and a client solar / battery-powered to check the tank’s status and notify It to the server.
Here we are going to assemble the Client PCB.

2

EBYTE LoRa E32 / esp8266 / LoRa wireless remote water tank and pump controller (ReWaL) / My PCB / Project

 by · Published 29 May 2022 · Last modified 20 August 2024

LoRa remote water level and pump controller (esp8266): Server PCB – 4

I must fill a tank 1.5 km away, so I create a 2-part controller.
A server with a relay to manage the pump and a client solar/battery-powered to check the tank’s status and notify the status to the server.
We are going to assemble the Server PCB.

0

EBYTE LoRa E32 / esp8266 / LoRa wireless remote water tank and pump controller (ReWaL) / Project / Sleep and Wake UP devices

 by · Published 20 May 2022 · Last modified 20 August 2024

LoRa remote water level and pump controller (ReWaL): client software – 3

I must fill a tank 1.5 km away, so I create a 2-part controller.
A server with a relay to manage the pump and a client solar/battery-powered to check the tank’s status and notify the status to the server.
Here we are going to look at the Client software.

0

EBYTE LoRa E32 / esp8266 / LoRa wireless remote water tank and pump controller (ReWaL) / Project

 by · Published 10 May 2022 · Last modified 20 August 2024

LoRa remote water level and pump controller (esp8266): server software – 2

I must fill a tank 1.5 km away, so I create a 2-part controller.
A server with a relay to manage the pump and a client solar/battery-powered to check the tank’s status and notify the server’s status.
Here, we are going to look at the Server software.

0

EBYTE LoRa E32 / esp8266 / LoRa wireless remote water tank and pump controller (ReWaL)

 by · Published 3 May 2022 · Last modified 20 August 2024

LoRa remote water tank level and pump controller (ReWaL): intro – 1

I have to fill a tank 1.5 km away, so I create a 2-part controller.
A server with a relay to manage the pump and a client solar/battery-powered to check the tank’s status and notify the server’s status.
Here is a little introduction to the project with the list of devices and libraries.

Exit mobile version