ABB Aurora Monitor upload/flash pre compiled file

Home › Forums › The projects hosted on the site › ABB (ex Power One) Aurora Web Inverter Monitor (WIM) › ABB Aurora Monitor upload/flash pre compiled file

Viewing 2 reply threads
  • Author
    Posts
    • 23 May 2021 at 11:07 #12342
      kriss

        I could ask you to put the ready batch into the processor under ESP8266Flasher. I can’t cope with installing libraries. I like the idea very much. I have the same AURORA inverter.

      • 23 May 2021 at 23:24 #12345
        Renzo Mischianti
        Keymaster

          Hi Kriss,
          I use esptool to upload, and i use this command

          esptool.exe -cd nodemcu -cb 921600 -cp COM17 -ca 0x00000 -cf Aurora_Web_Inverter_Monitor_242.bin

          use the version with ftp and upload the data files (html files), then I think It’s better if you put the version without ftp so you free some resources.

          bye Renzo

        • 15 September 2021 at 09:22 #14500
          Renzo Mischianti
          Keymaster

            Finally you can find precompiled files and instruction on this article
            ABB Aurora Web Inverter Monitor (WIM): upload the sketch and front end – 9

            Bye Renzo

        • Author
          Posts
        Viewing 2 reply threads
        • You must be logged in to reply to this topic.
        Exit mobile version