Ebyte: E22 communicating with E32

Home › Forums › The libraries hosted on the site › EByte LoRa e22 UART devices sx1262/sx1268 › Ebyte: E22 communicating with E32

Viewing 1 reply thread
  • Author
    Posts
    • 10 September 2024 at 06:45 #31576
      adi1316
      Participant

        Hi Renzo,
        Greetings !!

        I have Ebyte E32 module and E22 Module. I have tried to transmit the data from Ebyte E22 in broadcast mode , but E32(as receiver) is not receiving the data.

        Is it possible that E22 communicates with E32?

        E22 – Freq (866.125Mhz)
        E32 – Freq(866 Mhz)

      • 12 September 2024 at 11:52 #31597
        Renzo Mischianti
        Keymaster

          Hi Adi,

          I don’t think it’s possible for the E22 to communicate with the E32 directly. They use different chips and have different cryptographic systems, which makes them incompatible for direct communication.

          Best,
          Renzo

      • Author
        Posts
      Viewing 1 reply thread
      • You must be logged in to reply to this topic.
      Exit mobile version