Help me wiith Lora E22

[ksv151]

Hello!
I’m getting started with Arduino. I want to make two way data exchange between Lora E22 modules of type integer and byte. I ask you to change one of the examples from your library so that data can be entered not from the serial port monitor, but from outside.
I can’t figure out the code. For me, data transfer starts only after entering data in the serial port monitor, and I need data to be transferred between devices continuously.
One remote device consists of a pressure sensor and a relay, and the other receives int 0-1023 from the sensor and sends commands byte 1,2,3
I can’t implement persistent communication between them.
Sorry for my bad english, I’m from Ukraine.

[Renzo Mischianti]

Hi ksv,
you can send with a fixed message, a set of characters, and with the client read continuously.
You can refer to the article with fixed messages.

Ebyte LoRa E220 device for Arduino, esp32 or esp8266: fixed transmission, broadcast, monitor, and RSSI – 4

Bye Renzo

[Trena79]

thanks for the information

[Author]

Posts