LoRa E32 E22 ESP32 DEV KIT V3 shield PCB

[Andrew]

Ordered the boards from PCBWay through your link, only got 5 boards for $5, and having an issue as the ESP8266 board I have does not fit the pin spacing, the spacing on the boards I received is too wide.

[Renzo Mischianti]

Hi Andrew,
I can’t see your photo, read the note to the left to insert external image or upload a 512Kb image.

It’s strange It’s fit perfectly like you can see in the photo

Bye Renzo

[AndrewL]

Hi Renzo,

Lets try again! As you can see, hole spacing is too wide. The board I’m using is ESP2688, but board size is same as ESP32.

[Renzo Mischianti]

Hi Andrew,
I think you are wrong, I have some versions of NodeMCU (esp8266) and the form factor isn’t the same of esp32 DOIT DEVKIT v1 as you can see in the photo.

Bye Renzo

[AndrewL]

Hi Renzo,

OK, I’ll order a couple of the ESP32 Dev Kit boards and give them a try. Waiting for female headers anyway.

Thanks,

Andrew

[Renzo Mischianti]

Hi Andrew,
if you want exist the versione for WeMos D1 mini an esp8266.

Ebyte LoRa E32 device for Arduino, esp32 or esp8266: WOR (wake on radio) microcontroller and new WeMos D1 mini shield – Part 7

Bye Renzo

[Author]

Posts