Suggestion for Arduino LoRa shield v. 1.5

Home › Forums › Arduino › Suggestion for Arduino LoRa shield v. 1.5

Tagged: 

Viewing 1 reply thread
  • Author
    Posts
    • 10 April 2023 at 13:29 #25283
      Misio52
      Participant

        Greetings,

        Following the tutorials about LoRa I assembled the Arduino shield (v. 1.4) of Renzo. I found that placement of the M0/M1 DIP switch is not very fortunate. Solder pins of the switch come dangerously close to the metal enclosure of Arduino Uno USB connector underneath. There is enough free space on the shield PCB to move the switch to a safer location.
        Best regards,
        Marek

      • 10 April 2023 at 19:24 #25289
        Renzo Mischianti
        Keymaster

          Hi Misio,
          yes, I think It’s time for an upgraded version of It.
          But I’m very very busy, I’d like to do some porting to micropython of my library and so on.
          I need help 😛
          Bye Renzo

      • Author
        Posts
      Viewing 1 reply thread
      • You must be logged in to reply to this topic.
      Exit mobile version