Forum Replies Created
-
Posts
-
Thanks Renzo! There is nothing new for me here, sorry useless site! I just need to control the laser machine a little, but they don’t hear me here! All sources that you posted are empty. I compile them and get a stock version, it’s a shame!
Hi Renzo! Tell me what program can I use to connect the virtual COM port? And how to set up the connection of the LaserGrbl program with esp8266?
Hi Renzo! I restored my display via UART, flashed the bootloader, everything works. It is useless to write to MKS support, they abandoned this project a long time ago, there are a lot of errors and complaints from the consumer, they do not solve these problems. If it is not possible, then leave this project, I will look for another solution. WIFI MKS in this case is useless for the laser!
Hi Renzo! I can test your result on my equipment. While I broke the tft display with permanent firmware, I’m looking for a way to restore it 🙂
Hi Renzo! MKS TFT35 v1.0 firmware MKS_TFT35_CNC_V1.0.3
Mks WiFi firmware is yours. I would like the print widget to have the ability to select the number of passes and select the speed of the print pass. It does not delete files from the SD card, probably there is no such function in the original TFT firmware. So in general it is well suited for a two-axis machine, no temperature is needed and there is no hair dryer.
