MKS TFT35 Laser MksWifi

[Anton7558]

Thanks for your work . I liked everything, but there is a problem with the laser, two axes x and y, and therefore the machine control does not work. Can you fix the web interface for the 2 axis laser engraving machine?

[Renzo Mischianti]

Hi Anton,
I don’t have a machine to test, and now I’m out for all the week.
When I return to home I try to check something.
Bye Renzo

[Renzo Mischianti]

Hi Anton,
It seems fully compatible with MKS WiFi standards.
Witch kind of firmware do you have?
Bye Renzo

[Anton7558]

Hi Renzo! MKS TFT35 v1.0 firmware MKS_TFT35_CNC_V1.0.3
Mks WiFi firmware is yours. I would like the print widget to have the ability to select the number of passes and select the speed of the print pass. It does not delete files from the SD card, probably there is no such function in the original TFT firmware. So in general it is well suited for a two-axis machine, no temperature is needed and there is no hair dryer.

[Renzo Mischianti]

Hi Anton,
to do that I need some hardware, I write to Makerbase if they support the project with some sample hardware to help me.
Bye Renzo

[Anton7558]

Hi Renzo! I can test your result on my equipment. While I broke the tft display with permanent firmware, I’m looking for a way to restore it 🙂

[Renzo Mischianti]

Hi Anton,
to develop a web solution for that machine I need the hardware.
No response from Makerbase, you can try to write to him for that support (蔡钦栋 ).
Bye Renzo

[Anton7558]

Hi Renzo! I restored my display via UART, flashed the bootloader, everything works. It is useless to write to MKS support, they abandoned this project a long time ago, there are a lot of errors and complaints from the consumer, they do not solve these problems. If it is not possible, then leave this project, I will look for another solution. WIFI MKS in this case is useless for the laser!

[Anton7558]

Hi Renzo! Tell me what program can I use to connect the virtual COM port? And how to set up the connection of the LaserGrbl program with esp8266?

[Renzo Mischianti]

Hi Anton,
you can read all that information in the relative articles.
MKS WIFI for Makerbase Robin: boards and how to wiring esp12 & NodeMCU – 1
MKS WIFI for Makerbase Robin: PCB and how to compile & upload firmware – 2
MKS WIFI for Makerbase Robin: communication protocol and Cura plugin – 3
MKS WIFI for Makerbase Robin: firmware upgrade and new Web Socket features – 4
MKS WIFI for Makerbase Robin: BeePrint web interface with Camera on Flying Bear Ghost – 5

Bye Renzo

[Anton7558]

Thanks Renzo! There is nothing new for me here, sorry useless site! I just need to control the laser machine a little, but they don’t hear me here! All sources that you posted are empty. I compile them and get a stock version, it’s a shame!

[Renzo Mischianti]

Hi Anton,
I check the link and the source, and all are correct.
Explain which step you make to do the build.
Bye Renzo

[Author]

Posts