[Renzo Mischianti]

Hi lifeislife,
I think the gateway isn’t compatible with the module, EByte has his gateway, or you can build one like in these articles.

EByte LoRa E32 gateway: manage via REST and WebSocket (esp8266, esp32) – 1

Bye Renzo

[Renzo Mischianti]

Hi Vidyadhari,
you can use all the examples you find in the tutorial, the only change you need is the configuration and wiring for this constructor.

SoftwareSerial mySerial(11, 5);
LoRa_E32 e32ttl100(&mySerial, 3, 7, 6);

So in this example you must only change the highlighted lines and do the correct wiring.

bye Renzo

[Renzo Mischianti]

Hi fr,
It’s strange, It’s wrong, the internal storage was the SPIFF and with this operation you are going to read from SD with SPIFF configuration.

I’m going to check soon.
Bye Renzo

[Renzo Mischianti]

Hi fr,
I can’t replicate your issue, try to uncomment debug define, and post the result here.
Bye RM

[Renzo Mischianti]

Hi Jumbo,
I advise you to go on developer instruments (F12) –> Application –> Storage –> Clear site data.
Bye Renzo

[Renzo Mischianti]

Perfect Jumbo,
in the articles series, you can find a lot of information. If you have some trouble ask here.
Bye Renzo

[Renzo Mischianti]

Hi Vilin
you must put #define FREQUENCY_868 before the include of the library. If It does not work, add directly to the statesNaming.h file.
In my library, I allow connecting
Rx, Tx or Rx, Tx, AUX or Rx, Tx, AUX, M0, M1
AUX is quite important for performance (without AUX, I add the maximum delay to be sure the operation was complete).
You can save the configuration permanently or only for the session.

You can find more information here
Ebyte LoRa E220 LLCC68 device for Arduino, esp32 or esp8266: library – 2

Ebyte LoRa E220 LLCC68 device for Arduino, esp32 or esp8266: configuration – 3

Bye Renzo

[Renzo Mischianti]

Hi fr,
mmmm… as you can see in these lines I do begin of SD class only if you don’t do It.
So I don’t initialize the SD class, but I use your initialization.
Bye Renzo

[Renzo Mischianti]

Hi Jumbo,
I think this problem is correlated to another issue with some file encoding.
If I find some time, I try to verify and fix It.
Bye Renzo

[Renzo Mischianti]

I Jumbo,
I don’t know the french language, but if you know, you can update this file to get the french language.

Here the file.

Bye Renzo

[Renzo Mischianti]

Hi fr,
the error says that there isn’t a file named data.txt on SD.
But the sending code is correct.
You must also check the EMailSenderKey.h for the esp32 config.
bye Renzo

[Renzo Mischianti]

Mmmm.. It’s very strange, It returns the specs of File-system, not the actual information like esp32 or esp8266.
But there isn’t another method to retrieve the free space, I think I must write to rp2040 maintainer.

Bye Renzo

[Renzo Mischianti]

Hi Bart,
if you want to rewrite your web interface, you can follow the information in this article. Here, I describe the WebSocket server used to send commands to the printer.

MKS WIFI for Makerbase Robin: firmware upgrade and new Web Socket features – 4

For the current web interface, It’s normal to have some deprecated packages, the package goes ahead, and when they find some issue or add new features, It’s going deprecated.

Bye Renzo

[Renzo Mischianti]

Hi ksv,
you can send with a fixed message, a set of characters, and with the client read continuously.
You can refer to the article with fixed messages.

Ebyte LoRa E220 device for Arduino, esp32 or esp8266: fixed transmission, broadcast, monitor, and RSSI – 4

Bye Renzo

[Renzo Mischianti]

Hi ooztari,
normally when there is that issue is a wiring problem or low power supply.
Try to verify that.
Bye Renzo

[Author]

Posts