[Renzo Mischianti]

Hi,
you can find a complete tutorial with examples
for the E220 here
for the E22 here

Bye Renzo

[Renzo Mischianti]

Hi Orhan,
yes, you can use e220 for the LoRa rocket with the microcontroller you want.
Bye Renzo

[Renzo Mischianti]

Hi,
you can pass the baud rate via Constructor, but by default It use 9600.

Bye Renzo

[Renzo Mischianti]

If you want send data to thing network you must implement the specified protocol.
I think a better solution is to use a simple MQTT server like other IoT device.
Bye Renzo

[Renzo Mischianti]

Hi lifeislife,
I think the gateway isn’t compatible with the module, EByte has his gateway, or you can build one like in these articles.

EByte LoRa E32 gateway: manage via REST and WebSocket (esp8266, esp32) – 1

Bye Renzo

[Renzo Mischianti]

Hi Vidyadhari,
you can use all the examples you find in the tutorial, the only change you need is the configuration and wiring for this constructor.

SoftwareSerial mySerial(11, 5);
LoRa_E32 e32ttl100(&mySerial, 3, 7, 6);

So in this example you must only change the highlighted lines and do the correct wiring.

bye Renzo

[Renzo Mischianti]

Hi fr,
It’s strange, It’s wrong, the internal storage was the SPIFF and with this operation you are going to read from SD with SPIFF configuration.

I’m going to check soon.
Bye Renzo

[Renzo Mischianti]

Hi fr,
I can’t replicate your issue, try to uncomment debug define, and post the result here.
Bye RM

[Renzo Mischianti]

Hi Jumbo,
I advise you to go on developer instruments (F12) –> Application –> Storage –> Clear site data.
Bye Renzo

[Renzo Mischianti]

Perfect Jumbo,
in the articles series, you can find a lot of information. If you have some trouble ask here.
Bye Renzo

[Renzo Mischianti]

Hi Vilin
you must put #define FREQUENCY_868 before the include of the library. If It does not work, add directly to the statesNaming.h file.
In my library, I allow connecting
Rx, Tx or Rx, Tx, AUX or Rx, Tx, AUX, M0, M1
AUX is quite important for performance (without AUX, I add the maximum delay to be sure the operation was complete).
You can save the configuration permanently or only for the session.

You can find more information here
Ebyte LoRa E220 LLCC68 device for Arduino, esp32 or esp8266: library – 2

Ebyte LoRa E220 LLCC68 device for Arduino, esp32 or esp8266: configuration – 3

Bye Renzo

[Renzo Mischianti]

Hi fr,
mmmm… as you can see in these lines I do begin of SD class only if you don’t do It.
So I don’t initialize the SD class, but I use your initialization.
Bye Renzo

[Renzo Mischianti]

Hi Jumbo,
I think this problem is correlated to another issue with some file encoding.
If I find some time, I try to verify and fix It.
Bye Renzo

[Renzo Mischianti]

I Jumbo,
I don’t know the french language, but if you know, you can update this file to get the french language.

Here the file.

Bye Renzo

[Renzo Mischianti]

Hi fr,
the error says that there isn’t a file named data.txt on SD.
But the sending code is correct.
You must also check the EMailSenderKey.h for the esp32 config.
bye Renzo

[Author]

Posts