Flying Bear Ghost 5 simple spacer for dual drive extruder
I have a little problem with my Flying Bear Ghost 5; the filament does friction on the filament sensor because it changes angle when extruded, so I added a simple spacer to fix this.
Tagged: 3D printer upgrade
Some upgrade for my 3D printers.
Flying Bear Ghost 5 Fan Duct with the extended extruder to fix cooling problems – 3
I have a cooling problem with my Flying Bear Ghost 5, there are a lot of solutions like a custom head, but I try to resolve It with three simple steps.
MKS WIFI for Makerbase Robin: BeePrint web interface with Camera on Flying Bear Ghost – 5
I want to modify the WiFi module firmware of my FlyingBear Ghost 5 to support the Web Socket protocol and I want to develop the web interface as well, and I explain It in this article.
MKS WIFI for Makerbase Robin: firmware upgrade and new Web Socket features – 4
I want to modify the WiFi module firmware of my FlyingBear Ghost 5 to support the Web Socket protocol and I want to develop the web interface as well.
Now we are going to analyze the changes I made to the original MKS WiFi module, with the introduction of Web Socket and some little features to develop Web interface and debug.
MKS WIFI for Makerbase Robin: communication protocol and Cura plugin – 3
I want to modify the WiFi module firmware of my FlyingBear Ghost 5 to support the Web Socket protocol and I want to develop the web interface as well.
In this article I explain how the Makerbase develop the communication protocol via TCP messages and a little introduction to MKS WiFi plugin for Cura.
MKS WIFI for Makerbase Robin: PCB and how to compile & upload firmware – 2
I want to modify the WiFi module firmware of my FlyingBear Ghost 5 to support the Web Socket protocol and I want to develop the web interface as well.
Here I’d like to explain what is the MKS WiFi module how to program and how to connect a device that can be used like WiFi module alternative.
MKS WIFI for Makerbase Robin: boards and how to wiring esp12 & NodeMCU – 1
I want to modify the WiFi module firmware of my FlyingBear Ghost 5 to support the Web Socket protocol and I want to develop the web interface as well.
In this article I would like to say a few things about the Makerbase Robin Nano board hardware and interfacing with the WiFi module.
FlyingBear Ghost 5 enclosure: front cover/door
I finally buy another 3D printer, this time I choiche the FlyingBear Gost 5, and I made a case because I would like to print a more dangerous material like ABS, and to do that I create two different backs of the top cover, one standard and one with a fan for extracting harmful fumes. Fron cover/panel.
FlyingBear Ghost 5 enclosure: top cover
I finally buy another 3D printer, this time I choiche the FlyingBear Gost 5, and I made a case because I would like to print a more dangerous material like ABS, and to do that I create two different backs of the top cover, one standard and one with a fan for extracting harmful fumes. Top cover.
