Ebyte LoRa E32 device for Arduino, esp32 or esp8266: library – 2
Here a tutorial on E32 LoRa (Long Range) device very cheap and very long range (from 3Km to 8Km).
Here my library to simplify the complex usage.
Author: Renzo Mischianti
Ebyte LoRa E32 device for Arduino, esp32 or esp8266: specs and basic use – 1
Here a tutorial on E32 LoRa (Long Range) device very cheap and very long range (from 3Km to 8Km).
Start with specs and basic usage.
3D printed pins to use with nail to hang a picture
When I’m going to hang a picture the first problem is if I have a pins, this little tool help me to do a good job, but when I need they, never I can find they.
My solution is to reate a similar tool to print in 3d.
WeMos D1 mini (esp8266), debug on secondary UART – Part 3
WeMos D1 mini have 2 UART, one on dedicated pins and a transmit-only UART that can be enabled on GPIO2 (D4), It’s very usefully for debug.
Send email with esp8266 and Arduino (Library v1.x)
A simple method to notify a problem is to use email, It’s very usefully and simple to share, so I created a library to do It. I get some code from GSender a library that It’s quite simple, but not so complete and configurable.
WeMos D1 mini (esp8266), integrated SPIFFS Filesystem – Part 2
Serial Peripheral Interface Flash File System, or SPIFFS for short. It’s a light-weight file system for microcontrollers with an SPI flash chip. The on-board flash chip of the ESP8266 has plenty of space for your files.
WeMos D1 mini (esp8266), pinout, specs and IDE configuration – Part 1
WeMos D1 mini, a little guide to use this low cost but powerful microcontroller with WIFI integrated.
Specification and IDE configuration to start use It.
3D printed lantern for my wife
Summer work for my wife, a little lantern with led and removable battery
New Ciclop board in progress
I’d like to share some pics of my current work. New board for my Ciclop 3D scanner, in the next week I’d like to share the tutorial on how to build It.
ATtiny Programmer Board (ArduinoUNO As ISP)
I really like the ATtiny and programming it, so I built a simple board to use Arduino UNO as ISP in a faster way.
