Arduino to esp32 lora e32

Tagged: lora, Question

This topic has 6 replies, 3 voices, and was last updated 3 years, 7 months ago by Renzo Mischianti.

Viewing 6 reply threads

Author

Posts
- 9 March 2022 at 00:08 #19197
  George
  Participant
  Working on my final project and I need help with sending data from an Arduino UNO to an esp32 using Lora e32 I read on your library and I am reaching out if you could help me
- 9 March 2022 at 08:33 #19199
  Renzo Mischianti
  Keymaster
  Hi George,
  I think you can follow these steps.
  
  First, check the complete wiring (all pins, not M0 and M1 to GND and 3.3v). You can find the connection schema in this article.
  
  Ebyte LoRa E32 device for Arduino, esp32 or esp8266: library – 2
  
  Then understand the communication type you need
  
  Ebyte LoRa E32 device for Arduino, esp32 or esp8266: fixed transmission – 4
  
  And finally, configure the device.
  
  EByte LoRa E32 Web Manager: description, configure and demo (esp8266, esp32) – 2
  
  Change only the wiring from one device and another.
  Bye Renzo
- 9 March 2022 at 12:49 #19241
  George
  Participant
  I get an error when I try to compile the code for fixed transmission point. Find the screenshot attached indicating the error
- 9 March 2022 at 12:51 #19242
  George
  Participant
  The screenshot here
- 9 March 2022 at 13:08 #19247
  Renzo Mischianti
  Keymaster
  Hi George,
  read the comments on sketch, that a configuration for esp8266, and you have arduino and esp32.
  Bye Renzo
- 9 March 2022 at 13:49 #19248
  George
  Participant
  Oh okay , so how do i get the configuration for the esp32
- 9 March 2022 at 15:06 #19254
  Renzo Mischianti
  Keymaster
  Hi George,
  you can find the explanation of the configuration here.
  Bye Renzo
Author

Posts