I have :
RX MIC ---> 8
TX MIC ---> 9
AUX ---> 6
M0 ---> 4
M1 ---> 5
Init AUX pin!
Init M0 pin!
Init M1 pin!
Begin ex
Begin Software Serial
Begin
MODE NORMAL!
AUX HIGH!
Complete!
MODE CONFIGURATION!
AUX HIGH!
Complete!
3
Available buffer: 0 structure size: 12
----------------------------------------
HEAD : DA DD 4F
AddH : DF
AddL : FC
NetID : 5D
Chan : 22 -> 632MHz
SpeedParityBit : 1 -> 8O1
SpeedUARTDatte : 1 -> 2400bps
SpeedAirDataRate : 0 -> 0.3kbps
OptionSubPacketSett: 0 -> 240bytes (default)
OptionTranPower : 0 -> 22dBm (Default)
OptionRSSIAmbientNo: 0 -> Disabled (default)
TransModeWORPeriod : 0 -> 500ms
TransModeTransContr: 0 -> WOR Receiver (default)
TransModeEnableLBT : 0 -> Disabled (default)
TransModeEnableRSSI: 0 -> Disabled (default)
TransModeEnabRepeat: 0 -> Disabled (default)
TransModeFixedTrans: 0 -> Transparent transmission (default)
----------------------------------------
MODE NORMAL!
AUX HIGH!
Complete!
No response from device! (Check wiring)
12
LORA E22 Doesn’t work with No response from device! (Check wiring)
Hello,
I have lora E22 from EBYTE, and use this library : https://github.com/xreef/EByte_LoRa_E22_Series_Library
With this code : https://hastebin.com/jiyivesipo.cpp
I have : https://hastebin.com/tobaligaro.yaml
I have :