LoRa_E32.h with with LoLin NodeMCU

Hi Renzo, Sorry, my English is bad. I am from Ukraine. I test your sketch “arduinoSetConfiguration” with LoLin NodeMCU V3 and E32433T20 https://postimg.cc/kRKMpQyM VV(MCU) – +5(E32) – red G(MCU) – GND(E32) – green 3.3V - yellow D2(MCU) – TX(E32) - white, pullUP 4.7k 3.3V D3(MCU) – RX(E32) - black, pullUP 4.7k 3.3V M0(E32),M1(E32) – 3.3V,green,blue AUX(E32) - disconnect 1 pass. ResponseDescription from E32 – “Succes”,”1”. https://postimg.cc/34H3D4TP 2 pass .After reset mcu (push reset button). ResponseDescription from E32 – “Succes”,”1” 2 pass GetConfiguration options is not same 1 pass setConfiguration options. I think they should be the same. https://postimg.cc/1V3hpDYY I am disconnect D2,D3 https://postimg.cc/jCFkgVWj Monitor. ResponseDescription from E32 – “Succes”,”1” https://postimg.cc/KK051LBY Can your help me