[Renzo Mischianti]

Hi RD,
sorry for the late response, but I lost this message.

No, there isn’t a way to get all information on SX, but I think the simplest solution is to take a microcontroller with wifi and do a gateway.
It’s very simple to manage, and you can use every mqtt server and similar, or you can expose directly via websocket the messages arrived.

You can find something here.
EByte LoRa E32 gateway: manage via REST and WebSocket (esp8266, esp32) – 1

Bye Renzo

[Renzo Mischianti]

Hi Marek,
the linked software is only for E22, here the version for E220

EByte E220 desktop software for USB adapter

Bye Renzo

[Renzo Mischianti]

Hi,
you must set the correct frequency.

Ebyte LoRa E220 LLCC68 device for Arduino, esp32 or esp8266: library – 2

Bye Renzo

[Renzo Mischianti]

Hi George,
I can’t check the value of M0 and M1 if they are not connected.
But I am trying to think of something to prevent that situation.
Bye Renzo

[Renzo Mischianti]

Thanks George for your information, I will try to retest the specific case soon.
Thanks again Renzo

[Renzo Mischianti]

Hi Christ,
you can find the information you need here.
Bye Renzo

[Renzo Mischianti]

Hi Gilles,
we can’t know the reason, but I can suppose that the receiver flag as spam and put It in the specified folder or reject It.
Bye Renzo

[Renzo Mischianti]

Hi Maykusel,
normally It’s a power supply problem, otherwise, try to reduce the pull-up resistor.
Bye Renzo

[Renzo Mischianti]

Hi Dusan,
It’s very strange, but sometimes I get an error that I resolved with the use of the reduction of pull-up resistor on M0 and M1.
When M0 went HIGH also the M1 went HIGH.
With only this information I don’t have any additional ideas.

but the problem is very strange and I also like to know the reason.
Bye Renzo

[Renzo Mischianti]

Hi Rulio,
Does It possible that the configuration of the first upload (the partitions) is different from the generated firmware?
Bye Renzo

[Renzo Mischianti]

Hi Gilles,
w5500 don’t support TSL, so you can’t use Gmail, other people use service like sendgrid

You can find a lot of information on this topic

Weather radio station with Arduino UNO/MEGA Ethernet problem with EMailSender

Bye Renzo

[Renzo Mischianti]

Hi Ungkoon,
I don’t have an AS32, so to test it you must follow the guide of E32

Ebyte LoRa E32 device for Arduino, esp32 or esp8266: specs and basic use – 1

Bye Renzo

[Renzo Mischianti]

Hi Ungkoon,
do you mean that you tried the library with the AS32-TTL-100 and it works?
Thanks Renzo

[Renzo Mischianti]

Hi Frederic,
sorry but I don’t have time now to investigate. I have a lot of activity now that can’t wait.
Bye Renzo

[Renzo Mischianti]

For the last problem, I think It can be a power supply problem or wrong wiring, or a fired LoRa device.
But you must try to change something to find the correct solution.
Bye Renzo

[Author]

Posts