NodeMCU v3 (esp8266) details
The NodeMCU project begins in October 2014 shortly after the release of Espressif Systems’ ESP8266 module, when Hong releases the first files of the future NodeMCU firmware on GitHub. Two months later, the project expanded to include a free hardware platform developed by Huang R released with a Gerber extension called “Devkit v0.9”.
You can find It here WeMos D1 mini - NodeMCU V2 V2.1 V3 - esp01 - esp01 programmer
Specs
- Processor: L106 32-bit RISC microprocessor core based on the Tensilica Xtensa Diamond Standard 106Micro running at 80 MHz
- Memory:
- 32 KiB instruction RAM
- 32 KiB instruction cache RAM
- 80 KiB user-data RAM
- 16 KiB ETS system-data RAM
- External QSPI flash: 4 MiB
- IEEE 802.11 b/g/n Wi-Fi
- Integrated TR switch, balun, LNA, power amplifier and matching network
- WEP or WPA/WPA2 authentication, or open networks
- 16 GPIO pins
- SPI
- I²C (software implementation)[6]
- I²S interfaces with DMA (sharing pins with GPIO)
- UART on dedicated pins, plus a transmit-only UART can be enabled on GPIO2
- 10-bit ADC (successive approximation ADC)
How to
Driver download
Schematics NodeMCU v1.0 (original project)
Schematics NodeMCU v3
esp8266 technical sheet
Thanks
- Arduino
- esp8285
- esp8266
- ESP32
- ESP32 s2
- ESP32c3
- ESP32s3
- VCC-GND Studio YD-ESP32-S3
- ESP32-S3 DevKitC 1
- WeAct ESP32 S3 A
- WeMos LOLIN S3
- WeMos LOLIN S3 Pro
- Arduino SAMD
- STM32
- Raspberry Pi