ESP32 WeMos LOLIN32 high resolution pinout and specs

Link to the high resolution pinout image

You can find It here ESP32 Dev Kit v1 - TTGO T-Display 1.14 ESP32 - NodeMCU V3 V2 ESP8266 Lolin32 - NodeMCU ESP-32S - WeMos Lolin32 - WeMos Lolin32 mini - ESP32-CAM programmer - ESP32-CAM bundle - ESP32-WROOM-32 - ESP32-S

• Processors:
  • CPU: Xtensa dual-core (or single-core) 32-bit LX6 microprocessor, operating at 160 or 240 MHz and performing at up to 600 DMIPS
  • Ultra low power (ULP) co-processor
• Memory: 520 KiB SRAM
• Wireless connectivity:
  • Wi-Fi: 802.11 b/g/n
  • Bluetooth: v4.2 BR/EDR and BLE (shares the radio with Wi-Fi)
• Peripheral interfaces:
  • 12-bit SAR ADC up to 18 channels
  • 2 × 8-bit DACs
  • 10 × touch sensors (capacitive sensing GPIOs)
  • 4 × SPI
  • 2 × I²S interfaces
  • 2 × I²C interfaces
  • 3 × UART
  • SD/SDIO/CE-ATA/MMC/eMMC host controller
  • SDIO/SPI slave controller
  • Ethernet MAC interface with dedicated DMA and IEEE 1588 Precision Time Protocol support
  • CAN bus 2.0
  • Infrared remote controller (TX/RX, up to 8 channels)
  • Motor PWM
  • LED PWM (up to 16 channels)
  • Hall effect sensor
  • Ultra low power analog pre-amplifier
• Security:
  • IEEE 802.11 standard security features all supported, including WFA, WPA/WPA2 and WAPI
  • Secure boot
  • Flash encryption
  • 1024-bit OTP, up to 768-bit for customers
  • Cryptographic hardware acceleration: AES, SHA-2, RSA, elliptic curve cryptography (ECC), random number generator (RNG)
• Power management:
  • Internal low-dropout regulator
  • Individual power domain for RTC
  • 5μA deep sleep current
  • Wake up from GPIO interrupt, timer, ADC measurements, capacitive touch sensor interrupt
• Battery management
  • Connector for 3.7v battery (like 18650).

How to

1. ESP32: pinout, specs and Arduino IDE configuration
2. ESP32: integrated SPIFFS Filesystem
3. ESP32: manage multiple Serial and logging
4. ESP32 practical power saving
   1. ESP32 practical power saving: manage WiFi and CPU
   2. ESP32 practical power saving: modem and light sleep
   3. ESP32 practical power saving: deep sleep and hibernation
   4. ESP32 practical power saving: preserve data, timer and touch wake up
   5. ESP32 practical power saving: external and ULP wake up
   6. ESP32 practical power saving: UART and GPIO wake up
5. ESP32: integrated LittleFS FileSystem
6. ESP32: integrated FFat (Fat/exFAT) FileSystem
7. ESP32-wroom-32
   1. ESP32-wroom-32: flash, pinout, specs and IDE configuration
8. ESP32-CAM
   1. ESP32-CAM: pinout, specs and Arduino IDE configuration
   2. ESP32-CAM: upgrade CamerWebServer with flash features
9. ESP32: use ethernet w5500 with plain (HTTP) and SSL (HTTPS)
10. ESP32: use ethernet enc28j60 with plain (HTTP) and SSL (HTTPS)
11. How to use SD card with esp32
12. esp32 and esp8266: FAT filesystem on external SPI flash memory

13. Firmware and OTA update management
    1. Firmware management
       1. ESP32: flash compiled firmware (.bin)
       2. ESP32: flash compiled firmware and filesystem (.bin) with GUI tools
    2. OTA update with Arduino IDE
       1. ESP32 OTA update with Arduino IDE: filesystem, firmware, and password
    3. OTA update with Web Browser
       1. ESP32 OTA update with Web Browser: firmware, filesystem, and authentication
       2. ESP32 OTA update with Web Browser: upload in HTTPS (SSL/TLS) with self-signed certificate
       3. ESP32 OTA update with Web Browser: custom web interface
    4. Self OTA uptate from HTTP server
       1. ESP32 self OTA update firmware from the server
       2. ESP32 self OTA update firmware from the server with version check
       3. ESP32 self-OTA update in HTTPS (SSL/TLS) with trusted self-signed certificate
    5. Non-standard Firmware update
       1. ESP32 firmware and filesystem update from SD card
       2. ESP32 firmware and filesystem update with FTP client

14. Integrating LAN8720 with ESP32 for Ethernet Connectivity with plain (HTTP) and SSL (HTTPS)
15. Connecting the EByte E70 to ESP32 c3/s3 devices and a simple sketch example
16. ESP32-C3: pinout, specs and Arduino IDE configuration
17. Integrating W5500 with ESP32 Using Core 3: Native Ethernet Protocol Support with SSL and Other Features
18. Integrating LAN8720 with ESP32 Using Core 3: Native Ethernet Protocol Support with SSL and Other Features

Datasheet

Schema elettrico

Thanks

• Arduino
  • UNO R3
  • UNO R3 CH340 SMD clone
  • Nano
• esp8285
  • DT-06
• esp8266
  • WeMos D1 mini
  • esp12 E
  • esp07
  • NodeMCU v2.x
  • NodeMCU v3.x
  • ESP-01
  • ESP-01S
• ESP32
  • DOIT ESP32 DEV KIT v1
  • ESP32 DevKitC v4
  • ESP32 WeMos LOLIN32
  • ESP32 WeMos LOLIN32 Lite
  • ESP32 WeMos LOLIN D32
  • ESP32-wroom-32
  • NodeMCU-32S
  • ESP32-S
  • ESP32-CAM
• ESP32 s2
  • ESP32 S2 Saola 1MI
  • Ai-thinker ESP 12K
• ESP32c3
  • ESP32-C3-DevKitC-02
  • LuatOS CORE-ESP32 C3
  • ESP32C3-MINI-DK
  • WeAct Studio ESP32 C3 Core
  • WeMos LOLIN ESP32 C3 mini v1.0
  • WeMos LOLIN ESP32 C3 mini v2.1
  • WeMos LOLIN ESP32 C3 pico
• ESP32s3
  • VCC-GND Studio YD-ESP32-S3
  • ESP32-S3 DevKitC 1
  • WeAct ESP32 S3 A
  • WeMos LOLIN S3
  • WeMos LOLIN S3 Pro
• Arduino SAMD
  • Arduino MKR WiFi 1010
  • Arduino NANO 33 IoT
• STM32
  • STM32F103C8T6 Blue Pill
  • STM32F103C6T6 Blue Pill
  • STM32F401CCU6 Black Pill
  • STM32F411CEU6 Black Pill
• Raspberry Pi
  • Pico
  • Pico W
  • WeAct Studio rp2040
  • Waweshare rp2040-zero