[Claudio]

M0 & M1 must be grounded for transparent mode ?

[Claudio]

I have verified and reset factory config to my E32868T30D.
It work as Transmitter on TTGO TCALL SIM800L.

I’cant run it as Receiver. Continuous loop rebooting.

This is my PIN config.

This is my Setup and Loop (empty).

This is the result of printConfig :

Starting Receiver E32Series
No response from device! (Check wiring)
12
----------------------------------------
HEAD BIN: 10011001 153 99

AddH BIN: 11000011
AddL BIN: 10011010
Chan BIN: 138 -> 548MHz

SpeedParityBit BIN : 10 -> 8E1
SpeedUARTDataRate BIN : 101 -> 38400bps
SpeedAirDataRate BIN : 0 -> 0.3kbps
OptionTrans BIN : 1 -> Fixed transmission (first three bytes can be used as high/low address and channel)
OptionPullup BIN : 0 -> TXD, RXD, AUX are open-collectors
OptionWakeup BIN : 10 -> 750ms
OptionFEC BIN : 0 -> Turn off Forward Error Correction Switch
OptionPower BIN : 1 -> 17dBm

Any help is appreciated.
thank’s

[Author]

Posts