[Elija]

It works fine!

Thanks a lot!

[Elija]

Hi. Thanks to Renzo for the library, is very useful and complete.

I have a similar problem of frequency display with E220-900T30D module.

I tried to set
#define FREQUENCY_868

but the “getConfiguration” example shows me every time frequencies around 433 MHz (depending on choosen channel) but not frequencies around 868 MHz.

Is it possible that
#define FREQUENCY_868

must be set in another position of the sketch? I insert it when sketch starts, after the inclusion od libraries.

I use 1.0.3 library version.

Thanks!

Emuz24

P.S. Sorry for my english!

[Author]

Posts