Forum Replies Created
-
Posts
-
Hello,
After looking at where the error message was programmed, I saw
https://github.com/xreef/EMailSender/blob/master/EMailSender.cpp#L866,L870 that there was an EMAIL_FILE myFile = INTERNAL_STORAGE_CLASS which did not match SD which is external.
So I set EMAIL_FILE myFile = EXTERNAL_STORAGE_CLASS.open(attachments.fileDescriptor[i].url, EMAIL_FILE_READ);
And everything works.
I don’t know if this will disturb the rest of the library, but as a creator you must know it.
Cordially
frHello,
I noted that the error message occurred from line 888, so I looked at which line offered the test and it’s 868.
My subject being an attachment with SD I replaced INTERNAL with EXTERNAL and everything worked.
As for why line 868 is being tested, I didn’t look any further… It’s your code 😉
frHello,
I know how to read the fact that the file is not found, yet it is recognized when ordering. listDir(SD, “/”, 0);
Send me back to an EMailSenderKey.h configuration?
This is the updated configuration to version 3.0.6 in arduino 1.8.19.
Intervening in it is well beyond my skills.
A hypothesis: for my reading of SD I defined
spiSD.begin(SCK,MISO,MOSI,SS);
if(!SD.begin(SS, spiSD, SDSPEED))In your library wouldn’t you change these values?
Which explains=would be that after having seen the file it becomes untraceable to attach it to the email.
Note also that it is an ESP32-S2 and that sometimes there are things valid for an ESP32 that no longer work with esp32-s2
Have a good evening
frThank you for responding to me so quickly.
The link is precisely the one that allowed me to test with spiffs.
But there is no example of using SD
My level allows me to manage the initialization of the SD but what to put in place offileDescriptor[0].storageType = EMailSender::EMAIL_STORAGE_TYPE_SPIFFS;
An full example please !
