[Silvio]

Hi Henzo,
I was able to communicate the arduino and the esp32 using a fixed transmission, but I was not able to make the transmission of an esrtructure. Do you have an example of sending a struct to e220? I tried to do the transmission using the E32 library example, but I couldn’t.
Thanks!

[Silvio]

Hi Renzo,
I have started using your library for the E220, but have not yet had success communicating an arduino uno with an esp32. Can you help me? I am sending you the codes for the Arduino (Sender) and the ESP32 (Receiver).
I can configure the modules without problems, set the addresses and channels, the outputs show me that and I also checked using the EBYTE E220 software. I don’t know why the modules don’t communicate, the message that appears to me is that the arduino was successful in sending, but nothing appears in the esp32, I don’t know if it is a software or harrdware assembly error.
Thank you!

Translated with http://www.DeepL.com/Translator (free version)

Attachments:

You must be logged in to view attached files.

[Author]

Posts