[zac]

Ok. Thank you very much Renzo. I will try that.

One thing that came to mind now, the datasheet (page 16) states that the default frequency is 873.125MHz, but my antenna is suited for 915MHz. If i put a #define FREQUENCY_915 on my code, will it change the LoRa module frequency to 915MHz, or do i need to do something else when setting the configuration?

Thanks.
zac

[zac]

Hi Renzo.

Yes, i see. I only put M0 and M1 to 1 to configure them. After they are already configured i put M1 and M0 back to 0, but it doesn’t work nonetheless.

[Author]

Posts