[rodyeo]

A shortcut link to the original blog post for visitors …

ESP32-CAM: upgrade CameraWebServer with flash feature – 2

[rodyeo]

*** Note the default is set to 50K PWM frequency for the LED Flash Light to sync with certain country AC electric supply at 50Hz. I experiences horizontal running lines on the web ui video output screen. My country AC is 60Hz therefore my PWM frequency is supposed to be 60K instead. Correct me if I am wrong?

[rodyeo]

I am totally satisfied with final results of the ESP32-CAM CameraWebServer LED Intensity illuminator control function. Thank you Sir Renzo.

Attachments:

You must be logged in to view attached files.

[rodyeo]

A little contribution to the author Renzo @ https://github.com/espressif/arduino-esp32/issues/7009

Attachments:

You must be logged in to view attached files.

[rodyeo]

Signing off… this is Rodney * Ham Radio Operator @ 9W2YJ signing off for now 73 de …

Hi There! IoT @ https://my.cytron.io/referral?referral_id=b3f22146431542

[rodyeo]

I decide not to be over demand in request porting version 1.0.6 flash codes into this 2.0.4 LED illuminator source code in respect of the author Renzo creations, therefore this new LED illuminator intensity control slider features is much better than previous LED Flash toggle switch method at older source code implementation. Many thanks to Sir Renzo for all his hard work and effort. Bravo! … CeraWebServer204LEDilluminator.zip

Attachments:

You must be logged in to view attached files.

[rodyeo]

This is the said working source code “CameraWebServer204Flash.zip” with the LED Illuminator slider features which activated when Still Image Photo or Video Streaming Video is triggered.

Attachments:

You must be logged in to view attached files.

[rodyeo]

Here is a little sequential order documentation of all the changes starting from your contribution modification Sir Renzo … CameraWebServer204FlashNew60.PNG

Attachments:

You must be logged in to view attached files.

[rodyeo]

Here is a little sequential order documentation of all the changes starting from your contribution modification Sir Renzo … CameraWebServer204FlashNew7.PNG

Attachments:

You must be logged in to view attached files.

[rodyeo]

Here is a little sequential order documentation of all the changes starting from your contribution modification Sir Renzo … CameraWebServer204FlashNew5.PNG

Attachments:

You must be logged in to view attached files.

[rodyeo]

Here is a little sequential order documentation of all the changes starting from your contribution modification Sir Renzo … CameraWebServer204FlashNew4.PNG

Attachments:

You must be logged in to view attached files.

[rodyeo]

Here is a little sequential order documentation of all the changes starting from your contribution modification Sir Renzo … CameraWebServer204FlashNew3.PNG

Attachments:

You must be logged in to view attached files.

[rodyeo]

Here is a little sequential order documentation of all the changes starting from your contribution modification Sir Renzo … CameraWebServer204FlashNew2.PNG

Attachments:

You must be logged in to view attached files.

[rodyeo]

Here is a little sequential order documentation of all the changes starting from your contribution modification Sir Renzo … CameraWebServer204FlashNew1.PNG

Attachments:

You must be logged in to view attached files.

[rodyeo]

Another thread which was pending solution too…

https://github.com/espressif/arduino-esp32/pull/6791

Thanks to you. Sir Renzo their headache is over 😉

Attachments:

You must be logged in to view attached files.

[Author]

Posts