T-track for Cyclone PCB Factory
I’d like to renew my CNC for PCB, I select a project called Cyclone PCB Factory to start.
But I think there are some issue on the mechanic, and I need more features to use It with simplicity, so I start to fix, one of the most important features is T-track to hold PCB (and if needed simplify the double side milling).
I use standard Cyclone base but I put over T-track.
3D Model
Printed parts
I create 2 version of the base one as unique piece (but with lengt of 215cm) and one divided in 2 piece for smaller 3D printer bed.
T-track at work
Material
I use M3 screw for all and I had 4 Adjusting Nut For Hot Bed.
You can find here AliExpress
And in addition with the slider you obtain this T-track screw to fix holder.
The slider enter inside the track and you can move It up and down.
Download
- Base big (one piece)
- Base left and base right (two piece)
- Slider for M3 screw
- All holder
Hi, Slider for M3 screw is too big. What scale should be used? Can you upload the file with the correct size?
Hi, I use mm ad scale 1:1.. Without do nothing. I check the file and tell you.
Hi Renzo, have you check it?
It’s true, the scale of Slider for 3mm screw have wrong scale (mm instead inch), I think now It’s fixed.
Tell me If It’s OK.
Thanks Bye
Hi Renzo. I can’t download it, I get this on the screen:
solid TtrackSliderAll
facet normal -1.0 0.0 0.0
outer loop
vertex 2.8345913015056268 12.399773902746842 2.8000000000000025
vertex 2.8345913015056268 12.399773902746842 0.5000000000000028
vertex 2.8345913015056268 2.7997739027468365 2.8000000000000025
endloop
endfacet
facet normal -1.0 0.0 0.0
outer loop
vertex 2.8345913015056268 2.7997739027468365 0.5000000000000028
vertex 2.8345913015056268 2.7997739027468365 2.8000000000000025
vertex 2.8345913015056268 12.399773902746842 0.5000000000000028
endloop
endfacet
facet normal 0.0 1.0 0.0
Yes It’s probably that your borwser check that It’s a txt format (stl not compressed is in txt format), you must do
[right mouse button] –> and
Bye Renzo