ESP32: pinout, specs and Arduino IDE configuration – Part 1
ESP32, a little guide on how to use this low cost but powerful microcontroller with WIFI integrated.
Pinout, specification and IDE configuration to start use your esp32.
Author: Renzo Mischianti
REST server on esp8266 and esp32: GET and JSON formatter – Part 2
Microservices architecture is very popular for various reason, and It’s quite simple to implement with our microcontroller like esp32 or esp8266. GET and JSON formatter.
REST server on esp8266 and esp32: introduction – Part 1
Microservices architecture is very popular for various reason, and It’s quite simple to implement with our microcontroller like esp32 or esp8266. Startup.
How to interface Arduino, esp8266 or esp32 to RS-485
RS-485 work as a broadcast; when you send a message, all devices connected to the wire receive that, so peoples use It is better to implement a lot of protocol to send a message to a specified device or a broadcast address. This article uses regular communication from two devices in a very simple way.
FlatCAM practical tutorial: gcode and PCB milling – Part 6
FlatCAM is a program for preparing CNC jobs for making PCBs on a CNC router. Among other things, it can take a Gerber file generated by your favorite PCB CAD program, and create G-Code for Isolation routing.
Here we are going to create gcode and show the milling process.
FlatCAM practical tutorial: contour – Part 5
FlatCAM is a program for preparing CNC jobs for making PCBs on a CNC router. Among other things, it can take a Gerber file generated by your favorite PCB CAD program and create G-Code for Isolation routing.
Here we are going mill contour.
FlatCAM practical tutorial: silkscreen geometry – Part 4
FlatCAM is a program for preparing CNC jobs for making PCBs on a CNC router. Among other things, it can take a Gerber file generated by your favorite PCB CAD program and create G-Code for Isolation routing.
Here we are going to add a silkscreen.
FlatCAM practical tutorial: clean non copper area – Part 3
FlatCAM is a program for preparing CNC jobs for making PCBs on a CNC router. Among other things, it can take a Gerber file generated by your favorite PCB CAD program and create G-Code for Isolation routing.
Here we are going to remove copper islands.
PCF8574 i2c digital I/O expander: Arduino, esp8266 and esp32, rotary encoder – Part 2
Library to use i2c pcf8574 IC with arduino, esp8266 and esp32.
This IC can control (until 8) digital devices like button or led with 2 only pins.
Here I explain the manage of multiple rotary encoder.
FlatCAM practical tutorial: copper traces geometry – Part 2
FlatCAM is a program for preparing CNC jobs for making PCBs on a CNC router. Among other things, it can take a Gerber file generated by your favorite PCB CAD program, and create G-Code for Isolation routing.
Here tha isolation of traces.
