- This topic has 3 replies, 2 voices, and was last updated 2 years ago by .
- You must be logged in to reply to this topic.
Home › Forums › The projects hosted on the site › MKS WiFi firmware and BeePrint web interface › File list widdget not working
Hi Renzo,
I managed to install your firmware on a “Wemos D1 mini” and almost everything works as it should 🙂
There seems to be a problem with the File list widget, it shows a spinner and no files are listed. As soon as I access the Storage from the menu there is a “3D Printer disconnected” error.
It shows a “3D Printer connected” message after that but there are no files in the list 😐
Any idea what is causing this problem ??
Thanks,
Rainer
Hi Rainer,
try to format the SD of the printer.
Bye Renzo
I formatted the SD card (16Gb card, FAT32) but the error persists.
However the 4Gb SD card that came with the 3d printer started to work after the format.
It’s all good now 🙂
Thanks for the info!
Regards,
Rainer
Hehehe.. good!
If you want, send us some photos of your work.
Bye Renzo
More
3D Printer 3D printer upgrade ABB Arduino Arduino IDE Arduino SAMD boards Aurora AWS CNC Cyclone PCB Factory Cyclone PCB Factory how to build It Display DynamoDB E32 EMail esp01 esp32 esp8266 File System Firmware i2c Library LoRa MicroPython Milling PCB My PCB Networking PCB pinout Power saving Programming board Raspberry Pi REST API RF rp2040 SD Card Sensors Sleep and Wake UP SPI STM32 Temperature Tutorial Web Server Wemos D1 mini WiFi