<iframe src="https://www.googletagmanager.com/ns.html?id=GTM-WMJSQ8K" height="0" width="0" style="display:none;visibility:hidden"></iframe>

Suggestion for Arduino LoRa shield v. 1.5

Tagged: Arduino Shield

This topic has 1 reply, 2 voices, and was last updated 1 year, 7 months ago by Renzo Mischianti.

Viewing 1 reply thread

Author

Posts
- 10 April 2023 at 13:29 #25283
  Misio52
  Participant
  Greetings,
  
  Following the tutorials about LoRa I assembled the Arduino shield (v. 1.4) of Renzo. I found that placement of the M0/M1 DIP switch is not very fortunate. Solder pins of the switch come dangerously close to the metal enclosure of Arduino Uno USB connector underneath. There is enough free space on the shield PCB to move the switch to a safer location.
  Best regards,
  Marek
- 10 April 2023 at 19:24 #25289
  Renzo Mischianti
  Keymaster
  Hi Misio,
  yes, I think It’s time for an upgraded version of It.
  But I’m very very busy, I’d like to do some porting to micropython of my library and so on.
  I need help 😛
  Bye Renzo
Author

Posts

Viewing 1 reply thread

You must be logged in to reply to this topic.

Maintaining a repository (or site or forum) is a lot like tending to a garden - it requires constant care and attention to keep it thriving. If you're a skilled gardener (or coder!) and want to help keep our repository blooming, we'd love to have you on board! We're also looking for talented writers and forum moderators to help us grow our community. Interested in joining our team? Don't hesitate to reach out and let us know how you can contribute!