<iframe src="https://www.googletagmanager.com/ns.html?id=GTM-WMJSQ8K" height="0" width="0" style="display:none;visibility:hidden"></iframe>

LoRa E220 pull-up resistors with raspberry boards

This topic has 1 reply, 2 voices, and was last updated 9 months, 3 weeks ago by Renzo Mischianti.

Viewing 1 reply thread

Author

Posts
- 30 January 2024 at 14:13 #29556
  Guy
  Participant
  Hi I have started some test with the E220 and it seems to work as it should be. I am not an electronic guru, some subject like resistors are for me in the gray area. I have noticed that you are using 4.7K with the pico and not with the RPI 4. I did not seen the reason why. Thanks in advance for your help. Guy
- 30 January 2024 at 15:58 #29560
  Renzo Mischianti
  Keymaster
  Hi Guy,
  I check that normally aren’t needed, but to prevent messages and issues I add them every time.
  So if It works correctly, don’t worry.
  Bye Renzo
Author

Posts

Viewing 1 reply thread

You must be logged in to reply to this topic.

Maintaining a repository (or site or forum) is a lot like tending to a garden - it requires constant care and attention to keep it thriving. If you're a skilled gardener (or coder!) and want to help keep our repository blooming, we'd love to have you on board! We're also looking for talented writers and forum moderators to help us grow our community. Interested in joining our team? Don't hesitate to reach out and let us know how you can contribute!