- This topic has 2 replies, 2 voices, and was last updated 8 months, 2 weeks ago by
.
-
Posts
-
-
What is the typical, current comsumption for WOR Mode 1 and Mode 2?
Trying to meter WOR Mode 1 and Mode 2 current; Measuring Mode 1 anywhere from 15 uA at the start of measuring to 90 uA later in the readings. Mode 2 (sleep) I measure ~ 1 uA some lowwer uA.
Have you measured WOR Mode 1 and Mode 2 currents?
Checked the E220-900T30D User Manual; did not find any info on WOR Mode 1 and Mode 2 current.
William
-
I am seeing one steady and three fast changing currents; meter was inserted in +5 volt supply for the E220-900T30D:
11.6 mA Mode 0? ESP32 awake
79-69 µA Mode 1? ESP32 deep sleep
60-59 µA Mode 2? ESP32 wakeup message
1.01 – .26 µA Mode 3? ESP32 deep sleepWOR Cycle is set to WOR_4000_111.
Have I made correct observations of Modes?
William
-
Hi William,
Sorry, I lost the first message on this topic.
But I don’t have any measurements for esp32 and E220, but as described here
ESP32 practical power saving: deep sleep and hibernation – 3
remember that there are several differences between the different prototype boards.
Bye Renzo
-
- You must be logged in to reply to this topic.
