ESP32 – Ebyte LORA E32 433T30D V8

Hi Renzo,
I have trouble with config Lora E32 433T30D, I see it can sendmessage with code 1: success, but they can not receive. I dont know why and how to solve, I use ESP32 doit devkit V1, it do not support softwareSerial so I use hardwareSerial (Serial2) for connect Lora module.
I have info after config as below for 1st module:
HEAD : 10010001 145 91

AddH : 0
AddL : 2
Chan : 17 -> 433MHz

SpeedParityBit : 0 -> 8N1 (Default)
SpeedUARTDatte : 11 -> 9600bps (default)
SpeedAirDataRate : 10 -> 2.4kbps (default)
OptionTrans : 1 -> Fixed transmission (first three bytes can be used as high/low address and channel)
OptionPullup : 1 -> TXD, RXD, AUX are push-pulls/pull-ups
OptionWakeup : 0 -> 250ms (default)
OptionFEC : 1 -> Turn on Forward Error Correction Switch (Default)
OptionPower : 0 -> 20dBm (Default)
—————————————-
Success
Waiting for incoming data…
Data available: 0
CHECK: No_data

And 2nd Module as below:
HEAD : 11000011 195 C3

AddH : 0
AddL : 3
Chan : 17 -> 433MHz

SpeedParityBit : 0 -> 8N1 (Default)
SpeedUARTDatte : 11 -> 9600bps (default)
SpeedAirDataRate : 10 -> 2.4kbps (default)
OptionTrans : 1 -> Fixed transmission (first three bytes can be used as high/low address and channel)
OptionPullup : 1 -> TXD, RXD, AUX are push-pulls/pull-ups
OptionWakeup : 0 -> 250ms (default)
OptionFEC : 1 -> Turn on Forward Error Correction Switch (Default)
OptionPower : 0 -> 20dBm (Default)
—————————————-
Success
Waiting for incoming data…
Data available: 0
CHECK: No_data

I do not if I miss something, so pl help!